Reloading bench chair
Moderators: gds, bakerjw, renegade, bamachem
-
- Member
- Posts: 26
- Joined: Sat Jan 04, 2020 2:14 am
Reloading bench chair
What do you guys use for your reloading bench chair? My old one is done and I need to get something soon, this old one is killing my back since the support broke. Just thought I might get some good suggestions. My bench top sits a little over 34" from the floor.
-
- New Member
- Posts: 7
- Joined: Wed Feb 26, 2020 1:32 am
Re: Reloading bench chair
I stand up. My bench is at 4'6"
-
- Silent But Deadly
- Posts: 344
- Joined: Sun Aug 09, 2015 3:52 pm
Re: Reloading bench chair
I have used 2 red guard buckets stacked for the past 3 years
Only Jesus Christ Saves ! ! !
Re: Reloading bench chair
Instead of a chair, get an ultramount and stand.
https://inlinefabrication.com/collections/ultramounts
https://inlinefabrication.com/collections/ultramounts
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: Reloading bench chair
I stand too. But do have two cheap “bar stools” that are more catch all’s than seats.
I build my loading benches tall (and narrow) the tops are just under my elbows standing in front of them.
CW
I build my loading benches tall (and narrow) the tops are just under my elbows standing in front of them.
CW
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
- wildfowler
- Silent But Deadly
- Posts: 703
- Joined: Sun Mar 30, 2008 8:40 am
- Location: Mis'sippi
Re: Reloading bench chair
I’m building a row of countertop along two walls in my new shop as we speak, and mine will be sized tall enough to simply stand up like the others have suggested.
My current set up is finished around 42 inches tall and this one will be about an inch taller when I’m done.
I currently have my balance beam scale on a shelf that sits just below my eye level so I can easily bend over and prop against the bench top to read it straight on, but not so high that I have a tough time dispensing powder.
My current set up is finished around 42 inches tall and this one will be about an inch taller when I’m done.
I currently have my balance beam scale on a shelf that sits just below my eye level so I can easily bend over and prop against the bench top to read it straight on, but not so high that I have a tough time dispensing powder.
driven every kind of rig that's ever been made, driven the backroads so I wouldn't get weighed. - Lowell George
- plant.one
- Silent But Deadly
- Posts: 6823
- Joined: Tue Jun 23, 2009 8:31 pm
- Location: Oakland County, MI
Re: Reloading bench chair
golfindia wrote: ↑Mon Mar 09, 2020 8:50 am Instead of a chair, get an ultramount and stand.
https://inlinefabrication.com/collections/ultramounts
my bench is at 38" and i have my progressive mounted to a 9" ultra mount along with an ergo roller handle. full up with the handle is just below shoulder height, full down is about my belly button. its a nice comfortable mounting height/location/configuration for standing usage. I'm 5'10.
i also have foam floor mats down, over carpet - the interlocking foam ones for like kids play areas. that little bit of extra cusion was a real game changer for longer sessions standing there working
this is the type of mat i'm talking about. 6 peices (24" x 24" x 1/2") can be had for under $20 just about anywhere that sells them (walmart, amazon, etc etc etc) you can get them up to 1" thick if you want lots of padding, but those are gonna be about double the cost.
hth
Reloading info shared is based on experiences w/ my guns. Be safe and work up your loads from published data. Web data may not be accurate/safe.
This disclaimer will self destruct in 10 seconds.
This disclaimer will self destruct in 10 seconds.
Re: Reloading bench chair
Get a gaming chair. If my reloading desk was as low as yours, I would have one. Been considering cutting down the legs to use a gaming chair. The stool I use is killing my back.
https://www.amazon.com/XPELKYS-Computer ... B07QKXNRJ1
https://www.amazon.com/XPELKYS-Computer ... B07QKXNRJ1
-
- Member
- Posts: 26
- Joined: Sat Jan 04, 2020 2:14 am
Re: Reloading bench chair
Thats along the lines I was thinking, just seeing if there was any good ideas other than the old desk chair I was using. I understand some people stand but I'm not going to rebuild my whole setup just to stand up for no reason. Yes it's cluttered up right now, but it's home.bearcatrp wrote: ↑Mon Mar 09, 2020 8:21 pm Get a gaming chair. If my reloading desk was as low as yours, I would have one. Been considering cutting down the legs to use a gaming chair. The stool I use is killing my back.
https://www.amazon.com/XPELKYS-Computer ... B07QKXNRJ1
Re: Reloading bench chair
Check craigslist for your area. Might get lucky.
Who is online
Users browsing this forum: No registered users and 206 guests