What's your subsonic plinking bullet of choice

[300PreSub]

https://accuraoutdoors.com/product/30-200-sp/
I've been using these. .15 a bullet.

Just purchased 400 of these. I am working on load development. I did try these with 10.5 gr of 1680 and wasn't able to crack 900fps so more work will occur. Stability requires a little more FPS but overall it didn't do bad out of my 1/8 twist 10.5" running at ~850 fps. Did see slight shadowing of the bullet hole but not bad.

[nlvmike]

200 gr Berry's over 8.1 gr Lil' Gun.

[quirino21]

https://accuraoutdoors.com/product/30-200-sp/
I've been using these. .15 a bullet.

Just purchased 400 of these. I am working on load development. I did try these with 10.5 gr of 1680 and wasn't able to crack 900fps so more work will occur. Stability requires a little more FPS but overall it didn't do bad out of my 1/8 twist 10.5" running at ~850 fps. Did see slight shadowing of the bullet hole but not bad.

I loaded mine with 12.3g of 1680 and got 1047fps average out of my 9in 1/7 BCM. 12g of CFE BLK got me 986fps, 9.5g of H110 got 1024fps all with CCI 400's

[joepoorspowder]

200 gr Berry's over 8.1 gr Lil' Gun.

What’s your COL?

[lilMAC25]

247 gr cast from NOE mold that are then powder coated.


Fun and dirt cheap.

[flamatrix99]

How are the Berry's? I was going to order some but I hear jacketed are better then plated. I am also looking for a plinking round with a 300 Octane out of a PSA 10.5" barrel.

[45r]

Noe 230 hollow point powder coated.
Puts the swack on varmints and most accurate cast bullet I've tried.