Does this cycle an AR, or is it for one of your manual actions?Dolomite_Supafly wrote:168 grain Polymer tipped Hornady
8 grains of IMR 4227
2.283 OAL
It is a subsonic load but shoots extremely well for me. I will be adding more subsonic loads as I can.
Optimal load for 300 Blackout
Moderators: gds, bakerjw, renegade, bamachem
Re: Optimal load for 300 Blackout
- Dolomite_Supafly
- Silent But Deadly
- Posts: 3017
- Joined: Fri Oct 30, 2009 7:03 am
- Location: East Tennessee
- Contact:
Re: Optimal load for 300 Blackout
No idea, I shoot 99% of my stuff from single shots. I put together and AR for a few days then tore it back down because ARs are LOUD.GunFunZS wrote:Does this cycle an AR, or is it for one of your manual actions?Dolomite_Supafly wrote:168 grain Polymer tipped Hornady
8 grains of IMR 4227
2.283 OAL
It is a subsonic load but shoots extremely well for me. I will be adding more subsonic loads as I can.
Depending on barrel length and gas system it should cycle.
BTW, it will not feed from an AR magazine. OAL is too long.
WWW.thegunmilitia.com
Come join the militia!
Come join the militia!
Re: Optimal load for 300 Blackout
HKDolomite_Supafly wrote:No idea, I shoot 99% of my stuff from single shots. I put together and AR for a few days then tore it back down because ARs are LOUD.GunFunZS wrote:Does this cycle an AR, or is it for one of your manual actions?Dolomite_Supafly wrote:168 grain Polymer tipped Hornady
8 grains of IMR 4227
2.283 OAL
It is a subsonic load but shoots extremely well for me. I will be adding more subsonic loads as I can.
Depending on barrel length and gas system it should cycle.
BTW, it will not feed from an AR magazine. OAL is too long.
300 Blackout, not just for sub-sonics.
Re: Optimal load for 300 Blackout
What does HK mean in this context? Use an HK mag?dellet wrote:HKDolomite_Supafly wrote:No idea, I shoot 99% of my stuff from single shots. I put together and AR for a few days then tore it back down because ARs are LOUD.GunFunZS wrote:
Does this cycle an AR, or is it for one of your manual actions?
Depending on barrel length and gas system it should cycle.
BTW, it will not feed from an AR magazine. OAL is too long.
Re: Optimal load for 300 Blackout
Steel mags in general, HK in particular, will allow a longer length than plastic. Same external dimensions, thinner walls, leaves more room inside.GunFunZS wrote:What does HK mean in this context? Use an HK mag?dellet wrote:HKDolomite_Supafly wrote:
No idea, I shoot 99% of my stuff from single shots. I put together and AR for a few days then tore it back down because ARs are LOUD.
Depending on barrel length and gas system it should cycle.
BTW, it will not feed from an AR magazine. OAL is too long.
That round will likely fit, bullet profile on the guide rib may or may not cause a feeding issue. It would be a try and see.
300 Blackout, not just for sub-sonics.
Who is online
Users browsing this forum: Amazon [Bot] and 276 guests