Adding micrometer seating stem to RCBS Seating Die
Moderators: gds, bakerjw, renegade, bamachem
Adding micrometer seating stem to RCBS Seating Die
Good morning! Do any of you know if it's possible to add a micrometer seating stem to an RCBS 300BLK seating die? I have the RCBS 300BLK SB FL die set, & am looking for a more precise way to seat bullets.
-
- Senior Silent Operator
- Posts: 106
- Joined: Mon Aug 29, 2016 12:10 pm
Re: Adding micrometer seating stem to RCBS Seating Die
I looked at doing this also but I couldn't find a separate micrometer seater for their dies. I ended up getting a Hornady micrometer seating die and just left my RCBS seating die set up for the 220 gr, Berry's bullets I reload.
Re: Adding micrometer seating stem to RCBS Seating Die
Roverhound I have come to the same conclusion. Too bad RCBS doesn't make an add-on micrometer seating stem for their dies.
Thank you for your reply!
Thank you for your reply!
Re: Adding micrometer seating stem to RCBS Seating Die
Is either the Redding or the hornaday mic seating stem not the same threads that are on your rcbs die?
-
- Senior Silent Operator
- Posts: 144
- Joined: Mon Oct 12, 2015 11:33 am
- Location: San Antonio, Texas
Re: Adding micrometer seating stem to RCBS Seating Die
On midway both the redding and hornady say they wont work with other dies, but i have the redding and i installed it on a dillon 308 seater die and it has worked flawless. I love mine. It certainly was worth every dime considering how much i change and test different loads. I believe i researched it through google and someone had used the same setup so i took a chance figuring i could return it. Like guest 762 said, I would just check and see if its the same thread pitch as your die before you decide.
-
- Senior Silent Operator
- Posts: 106
- Joined: Mon Aug 29, 2016 12:10 pm
Re: Adding micrometer seating stem to RCBS Seating Die
Unfortunately no.Guest762 wrote:Is either the Redding or the hornaday mic seating stem not the same threads that are on your rcbs die?
You can find the Hornady for good prices on ebay or just by searching.
Re: Adding micrometer seating stem to RCBS Seating Die
Your post intrigued me. Went down the rabbit hole on it lastnight. And through several random forum posts. No, different treads all around for each makers dies.
Re: Adding micrometer seating stem to RCBS Seating Die
pd_3307 wrote:On midway both the redding and hornady say they wont work with other dies, but i have the redding and i installed it on a dillon 308 seater die and it has worked flawless. I love mine. It certainly was worth every dime considering how much i change and test different loads. I believe i researched it through google and someone had used the same setup so i took a chance figuring i could return it. Like guest 762 said, I would just check and see if its the same thread pitch as your die before you decide.
pd_3307,
Could you provide some details on your setup... Redding PN, Dillon PN.
Regards,
-P
Re: Adding micrometer seating stem to RCBS Seating Die
Redding micrometer is compatible with Dillon Rifle Dies.
Midway USA and other retailers sell the Redding part.
Dillon makes carbide only dies for 300 Blackout
Midway USA and other retailers sell the Redding part.
Dillon makes carbide only dies for 300 Blackout
Industry Pro Staff for Dynamic Research Technologies When One Shot is All You Get www.drtammo.com https://www.facebook.com/drtammo/
Join the Revolution http://youtube.com/watch?v=3_Xnx3BFuLk
Join the Revolution http://youtube.com/watch?v=3_Xnx3BFuLk
Re: Adding micrometer seating stem to RCBS Seating Die
The Forster competition die is a really good choice. It makes very concentric ammunition.
Who is online
Users browsing this forum: Amazon [Bot], Bing [Bot] and 137 guests