Suppressor for RARR

Moderators: gds, bakerjw, renegade

Gjs
Member
Posts: 23
Joined: Thu Apr 19, 2018 3:45 pm

Suppressor for RARR

Post by Gjs » Sat Mar 02, 2019 2:44 pm

Hi
Any recommendations for a suppressor for RARR I want something short and fat so the rifle does not get to long, I’m in the uk but we do have access to a lot of brands / makes but maybe not all of them. will shoot jacketed & gas checked lead.
Cheers for any info
Gjs

BulletFlight for Android
Whole Bunches
Silent But Deadly
Posts: 1215
Joined: Mon Oct 17, 2011 8:09 am
Location: NW Florida

Re: Suppressor for RARR

Post by Whole Bunches » Sat Mar 02, 2019 3:38 pm

Both my RARR's like the thread-on CRUX Ark30. The Gemtech Quicksand quick mount suppressor, while quieter with its longer size, did not give as good of accuracy. However, since you'd be shooting some gas check lead bullets, I'd recommend a suppressor that you can take apart to remove the lead that will build up from the lead vapors. I am not familiar with take-apart 30 cal suppressors, so I'll let someone else give advice in that area.

Personally, I'd use a suppressor when shooting jacketed bullets (which I do all the time, subsonic and supersonic), and shooting without a suppressor when using lead bullets.

Let me put it this way: I fired some (about 10 shots) lead bullets suppressed and could see lead build up in the first chamber after only a few rounds. I stopped. The lead build up gradually mostly went away after quite a few jacketed bullets. Still can see some lead in the corners of the blast chamber. No leading was seen in the gun barrel itself. Maybe it was a fluke, but that was the end of suppressed lead bullets in the Blackout.

User avatar
bangbangping
Silent But Deadly
Posts: 2611
Joined: Sun Sep 15, 2013 6:34 pm
Location: Texas Gulf Coast

Re: Suppressor for RARR

Post by bangbangping » Sat Mar 02, 2019 8:31 pm

Meh...a little lead in the suppressor makes it quieter. :lol:

Personally, I'd look at the Thunder Beast Ultra 5 or Ultra 7, depending on how short you want to go.

Gjs
Member
Posts: 23
Joined: Thu Apr 19, 2018 3:45 pm

Re: Suppressor for RARR

Post by Gjs » Mon Mar 04, 2019 5:37 pm

Cheers for the info

Gjs
Member
Posts: 23
Joined: Thu Apr 19, 2018 3:45 pm

Re: Suppressor for RARR

Post by Gjs » Mon Mar 04, 2019 5:53 pm

Hi
I have also been powder coating my bullets what about putting them through the suppressor would that cure leading issues :?:

User avatar
bangbangping
Silent But Deadly
Posts: 2611
Joined: Sun Sep 15, 2013 6:34 pm
Location: Texas Gulf Coast

Re: Suppressor for RARR

Post by bangbangping » Mon Mar 04, 2019 6:09 pm

Gjs wrote:Hi
I have also been powder coating my bullets what about putting them through the suppressor would that cure leading issues :?:
I've been shooting PC bullets for several years without any lead buildup. And as alluded to above, I don't get too worked up about it anyway. There are ways to clean it out if it ever becomes an issue.

BlogSarge
Silent But Deadly
Posts: 1293
Joined: Mon Oct 21, 2013 11:10 pm

Re: Suppressor for RARR

Post by BlogSarge » Mon Mar 04, 2019 6:10 pm

30 cal Silencerco Omega on mine is about MOA with a 4x scope. And nicely quiet!

User avatar
thisguysguns
Silent But Deadly
Posts: 240
Joined: Mon Jun 29, 2015 4:20 pm

Re: Suppressor for RARR

Post by thisguysguns » Mon Mar 04, 2019 8:21 pm

SilencerCo Harvester 300 is a great option if you can get it across the pond. It's very quiet, and at 11oz with mount (about 0.31kg), you barely even notice it on the end of your gun. Silences the RARR very well. I've had zero point of impact shift so far.
$1.35 a day... Best job I ever had.

Gjs
Member
Posts: 23
Joined: Thu Apr 19, 2018 3:45 pm

Re: Suppressor for RARR

Post by Gjs » Sun Mar 10, 2019 7:51 am

Cheers for the replies and suggestions it just depends What I can get in the UK there are some UK manufactures ones from Europe, ASE Utra are from Finland they look good & have been recommended and Tikka rifles come from there and they are very good.
I will see what USA makes I can get over here & let you know.

bearcatrp
Silent But Deadly
Posts: 385
Joined: Tue Jul 25, 2017 9:31 am

Re: Suppressor for RARR

Post by bearcatrp » Sun Mar 10, 2019 10:08 pm

I have a sandman-s on my 10 inch 300BO. Don’t need hearing protection. Short enough to keep it quiet. Love the quick detach system. Built like a tank!

Post Reply