Handi extended scope mounting

Moderators: gds, bakerjw, renegade

Dinny
Member
Posts: 36
Joined: Wed Dec 10, 2014 5:51 pm
Location: Franklin, Indiana

Re: Handi extended scope mounting

Post by Dinny »

Problem fixed? I have machinists/ gunsmiths shorten and d&t my hammer for custom threaded extensions. They're lighter than factory extensions and I have yet to have one come loose. I do apply a dab of blue loctite though.

Thanks, Dinny
Medics Save!
triggerman300
Senior Silent Operator
Posts: 136
Joined: Sun Jul 05, 2015 6:57 pm
Location: E-town,Pa

Re: Handi extended scope mounting

Post by triggerman300 »

Guess I'm just lucky. Never had a misfire on my 300 AAC. Has a hammer extension and a trigger job.
Geezerbiker
Member
Posts: 21
Joined: Mon Jan 05, 2015 9:08 pm

Re: Handi extended scope mounting

Post by Geezerbiker »

I bought a couple extra hammers from Gun Parts with the idea of drilling a hole and tapping in a steel pin to make it easier to pull the hammer back with a scope. I also planned to try and skeletonize one a bit to try and improve lock time. I got to where I found that I needed to anneal it before I could work on it. About then I moved and I haven't gotten back to it.

My concern is after I anneal it, I do I harden it again with out screwing it up...

Tony
Barryfer
New Member
Posts: 4
Joined: Tue Jul 02, 2019 1:22 am
Location: United Kingdom
Contact:

Handi extended scope mounting

Post by Barryfer »

I have known a few people who have epoxy glued mounts on. May be more damaging to the finish than D&T.
The Vianni scope mount might work also and only need to DT the barrel ?
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests