Savage Question?
Moderators: gds, bakerjw, renegade
- slickyboyboo79
- Silent But Deadly
- Posts: 159
- Joined: Fri May 17, 2013 4:12 pm
- Location: Clinton, Mississippi
Savage Question?
I'm building a Savage 300 BLK. That said, what would you use for your build, a standard Model 10 style rifle, or go with an Axis?
-
- Silent But Deadly
- Posts: 3808
- Joined: Wed Jun 13, 2012 9:01 pm
Re: Savage Question?
Well I'm biased as I did a barrel swap on an Axis to make my Savage 300BLK. Here is a detailed set of lessons learned and other info on my assembly:slickyboyboo79 wrote:I'm building a Savage 300 BLK. That said, what would you use for your build, a standard Model 10 style rifle, or go with an Axis?
viewtopic.php?f=137&t=80114&start=20#p760791
The Axis is a super cheap way to go unless you already have a Model 10 hanging around or can find a busted barrel .223.
Let me know if you have any questions over that information. It was done a few years ago but I may be able to recall any info you may need to know about.
- slickyboyboo79
- Silent But Deadly
- Posts: 159
- Joined: Fri May 17, 2013 4:12 pm
- Location: Clinton, Mississippi
Re: Savage Question?
The only thing I worry about is the quality of the Axis. I have a Savage Model 16 WW, and it's a lot higher quality (but it's supposed to be). What's the downside of building on an Axis action?tallburnedmidget wrote:Well I'm biased as I did a barrel swap on an Axis to make my Savage 300BLK. Here is a detailed set of lessons learned and other info on my assembly:slickyboyboo79 wrote:I'm building a Savage 300 BLK. That said, what would you use for your build, a standard Model 10 style rifle, or go with an Axis?
viewtopic.php?f=137&t=80114&start=20#p760791
The Axis is a super cheap way to go unless you already have a Model 10 hanging around or can find a busted barrel .223.
Let me know if you have any questions over that information. It was done a few years ago but I may be able to recall any info you may need to know about.
-
- Silent But Deadly
- Posts: 3808
- Joined: Wed Jun 13, 2012 9:01 pm
Re: Savage Question?
slickyboyboo79 wrote:The only thing I worry about is the quality of the Axis. I have a Savage Model 16 WW, and it's a lot higher quality (but it's supposed to be). What's the downside of building on an Axis action?tallburnedmidget wrote:Well I'm biased as I did a barrel swap on an Axis to make my Savage 300BLK. Here is a detailed set of lessons learned and other info on my assembly:slickyboyboo79 wrote:I'm building a Savage 300 BLK. That said, what would you use for your build, a standard Model 10 style rifle, or go with an Axis?
viewtopic.php?f=137&t=80114&start=20#p760791
The Axis is a super cheap way to go unless you already have a Model 10 hanging around or can find a busted barrel .223.
Let me know if you have any questions over that information. It was done a few years ago but I may be able to recall any info you may need to know about.
The Axis' main quality issue is the stock. It's a "synthetic" stock (plastic). The action and barrels have never been an issue as far as I have experienced, heard from others, and read online.
I've fired a few different Axis rifles and they have all shot well. I think it may be the best line of budget rifles out there because I know 4-5 people who have them and they are all very accurate.
The trigger could use an upgrade but that is most out of the box triggers and I mine shoots fine. I believe the Savage Accutrigger works as a drop in upgrade so that's an easy solution if you really want to upgrade the trigger.
My biggest issue is that the Axis rifle is light with the synthetic stock. So when the wind is blowing you get a little more wiggle than if you had a solid wood stock or a heavier rifle.
Some major things to consider are that it may be easier to get a 300BLK Axis barrel than another type of Savage barrel AND understand that you need to get a "short" action and if your Savage is NOT a .223 then you must get a new .223 bolt or bolt face to do your conversion.
I found it simpler and cheaper to do the Axis conversion than another Savage type due to price, availability of parts/model, and information available so be sure to do your homework
- slickyboyboo79
- Silent But Deadly
- Posts: 159
- Joined: Fri May 17, 2013 4:12 pm
- Location: Clinton, Mississippi
Re: Savage Question?
I am working on my homework right now. I already have a heavy 17.5" 8 twist Savage Prefit Barrel, so I can check that off the list. The plan is to go with a Boyds stock, regardless of the action I choose (I have one on my model 16 WW, and I like it). The Boyds, are just as light as any of the B&C stocks for a short action savage. I am hoping I can find one that already has the Accutrigger, so I will have a decent trigger to start, and can upgrade that when I decide to. I am planning on only buying a 223, just simply for the ease of not having to change the bolt head.tallburnedmidget wrote:slickyboyboo79 wrote:The only thing I worry about is the quality of the Axis. I have a Savage Model 16 WW, and it's a lot higher quality (but it's supposed to be). What's the downside of building on an Axis action?tallburnedmidget wrote:
Well I'm biased as I did a barrel swap on an Axis to make my Savage 300BLK. Here is a detailed set of lessons learned and other info on my assembly:
viewtopic.php?f=137&t=80114&start=20#p760791
The Axis is a super cheap way to go unless you already have a Model 10 hanging around or can find a busted barrel .223.
Let me know if you have any questions over that information. It was done a few years ago but I may be able to recall any info you may need to know about.
The Axis' main quality issue is the stock. It's a "synthetic" stock (plastic). The action and barrels have never been an issue as far as I have experienced, heard from others, and read online.
I've fired a few different Axis rifles and they have all shot well. I think it may be the best line of budget rifles out there because I know 4-5 people who have them and they are all very accurate.
The trigger could use an upgrade but that is most out of the box triggers and I mine shoots fine. I believe the Savage Accutrigger works as a drop in upgrade so that's an easy solution if you really want to upgrade the trigger.
My biggest issue is that the Axis rifle is light with the synthetic stock. So when the wind is blowing you get a little more wiggle than if you had a solid wood stock or a heavier rifle.
Some major things to consider are that it may be easier to get a 300BLK Axis barrel than another type of Savage barrel AND understand that you need to get a "short" action and if your Savage is NOT a .223 then you must get a new .223 bolt or bolt face to do your conversion.
I found it simpler and cheaper to do the Axis conversion than another Savage type due to price, availability of parts/model, and information available so be sure to do your homework
-
- Silent But Deadly
- Posts: 3808
- Joined: Wed Jun 13, 2012 9:01 pm
Re: Savage Question?
Sounds like you are making good progress on finding all the pieces you want.slickyboyboo79 wrote: I am working on my homework right now. I already have a heavy 17.5" 8 twist Savage Prefit Barrel, so I can check that off the list. The plan is to go with a Boyds stock, regardless of the action I choose (I have one on my model 16 WW, and I like it). The Boyds, are just as light as any of the B&C stocks for a short action savage. I am hoping I can find one that already has the Accutrigger, so I will have a decent trigger to start, and can upgrade that when I decide to. I am planning on only buying a 223, just simply for the ease of not having to change the bolt head.
Don't forget the tools like the go, no-go guages, receiver wrench, barrel nut wrench etc. Assuming you are putting together yourself
- slickyboyboo79
- Silent But Deadly
- Posts: 159
- Joined: Fri May 17, 2013 4:12 pm
- Location: Clinton, Mississippi
Re: Savage Question?
Yeah, I plan to do the work myself. I found a SS Axis for a really good price yesterday, so it will be here next week. I already have the go and no-go gauges, just have to buy the wrenches. I'm also planning on getting the Axis Pillar and Mounting Clip Kit for a Boyd's stock, from V3 Tactical.tallburnedmidget wrote:Sounds like you are making good progress on finding all the pieces you want.slickyboyboo79 wrote: I am working on my homework right now. I already have a heavy 17.5" 8 twist Savage Prefit Barrel, so I can check that off the list. The plan is to go with a Boyds stock, regardless of the action I choose (I have one on my model 16 WW, and I like it). The Boyds, are just as light as any of the B&C stocks for a short action savage. I am hoping I can find one that already has the Accutrigger, so I will have a decent trigger to start, and can upgrade that when I decide to. I am planning on only buying a 223, just simply for the ease of not having to change the bolt head.
Don't forget the tools like the go, no-go guages, receiver wrench, barrel nut wrench etc. Assuming you are putting together yourself
-
- Silent But Deadly
- Posts: 3808
- Joined: Wed Jun 13, 2012 9:01 pm
Re: Savage Question?
slickyboyboo79 wrote: Yeah, I plan to do the work myself. I found a SS Axis for a really good price yesterday, so it will be here next week. I already have the go and no-go gauges, just have to buy the wrenches. I'm also planning on getting the Axis Pillar and Mounting Clip Kit for a Boyd's stock, from V3 Tactical.
Sounds like you are about set. Just make sure you turn the barrel nut wrench in the correct direction. I was turning the wrong way at first and that lead to some issues. I was able to fix them but had I not been a big hulking guy I never would have gotten the barrel unscrewed from the action hahaha
- slickyboyboo79
- Silent But Deadly
- Posts: 159
- Joined: Fri May 17, 2013 4:12 pm
- Location: Clinton, Mississippi
Re: Savage Question?
Very Good Tip! LOLtallburnedmidget wrote:slickyboyboo79 wrote: Yeah, I plan to do the work myself. I found a SS Axis for a really good price yesterday, so it will be here next week. I already have the go and no-go gauges, just have to buy the wrenches. I'm also planning on getting the Axis Pillar and Mounting Clip Kit for a Boyd's stock, from V3 Tactical.
Sounds like you are about set. Just make sure you turn the barrel nut wrench in the correct direction. I was turning the wrong way at first and that lead to some issues. I was able to fix them but had I not been a big hulking guy I never would have gotten the barrel unscrewed from the action hahaha
-
- Member
- Posts: 21
- Joined: Fri Jul 24, 2015 5:25 pm
Re: Savage Question?
I would favor an older Savage 10-12-16 SA...top right side bolt release...
not anything with the trigger gaurd bolt release...
have no experience with the Axis series..
not anything with the trigger gaurd bolt release...
have no experience with the Axis series..
Who is online
Users browsing this forum: No registered users and 70 guests