Mossberg MVP in 300BLK.
Tony
300 BLK Bolt gun picture thread
Moderators: gds, bakerjw, renegade
-
- New Member
- Posts: 6
- Joined: Thu Nov 24, 2005 3:30 pm
- Location: Broken Arrow, OK
- Contact:
Re: 300 BLK Bolt gun picture thread
Looks good!
Who built it? How much did it cost to convert to 300 BLK?
Does it still use a barrel nut, or is it set up like a Remington?
M.
THANKS! TO THE AMERICAN VOTERS FOR DEFEATING CLINTON AND MAKING TRUMP OUR PRESIDENT!
-
- Member
- Posts: 12
- Joined: Sat Jun 07, 2014 2:06 am
Re: 300 BLK Bolt gun picture thread
I do believe that is one of the 7 R&D test mules built by Tony Rumore of Tromix Lead delivery systems.
It can use the factory nut or the Tromix two piece nut for set and forget take down and switch barrel capability.
The first production run has both 16 inch medium heavy barrels to match the contour of the factory 16 to18.5 inch tubes and a 19 inch matching the contour of the factory 20 inch. Barrels and tools are done. Barrel nuts are in the works.
More of it below.
Photo credits Tony Rumore.
Copied and pasted from the Tromix 300 Blackout thread at MossbergMVP.com
It can use the factory nut or the Tromix two piece nut for set and forget take down and switch barrel capability.
The first production run has both 16 inch medium heavy barrels to match the contour of the factory 16 to18.5 inch tubes and a 19 inch matching the contour of the factory 20 inch. Barrels and tools are done. Barrel nuts are in the works.
More of it below.
Photo credits Tony Rumore.
Copied and pasted from the Tromix 300 Blackout thread at MossbergMVP.com
- Magnum Mike
- Silent But Deadly
- Posts: 585
- Joined: Mon Apr 08, 2013 10:12 pm
- Location: westerrn PA
- Contact:
Re: 300 BLK Bolt gun picture thread
Update:
Installed a Leupold MK4 4.5-14 in Leupold steel bases and (cant remember the rings brand) and I finally purchased a 5/8-24 piston and fixed barrel spacer for my 45Osprey.
Kicking around an XLR chassis now. Once my 762 cans get here, this gun gets a Trifecta brake and the Omega or 762SpecWar.
Installed a Leupold MK4 4.5-14 in Leupold steel bases and (cant remember the rings brand) and I finally purchased a 5/8-24 piston and fixed barrel spacer for my 45Osprey.
Kicking around an XLR chassis now. Once my 762 cans get here, this gun gets a Trifecta brake and the Omega or 762SpecWar.
michael
--------------------
NRA Life Member
John 3:3
Check out our web store @ http://www.accuratearmsandammo.com
--------------------
NRA Life Member
John 3:3
Check out our web store @ http://www.accuratearmsandammo.com
-
- New Member
- Posts: 4
- Joined: Wed Dec 24, 2014 12:26 am
Re: 300 BLK Bolt gun picture thread
Finally tracked down my own Ruger American Ranch. It came from Cabela's and I got them to honor the sale price of 379.99. It was a little more than I was hoping for after tax and fuel, but I have one and I can't complain.
Few weird things, it has some scuffs. One on the barrel, a couple on the stock. The magazine held 6 rounds immediately. The bore patches came out pretty dirty on a new gun. I still took it home, but I'm hoping it shoots well.
I picked up some low rings while I was there. I had a Nikon P-300 waiting for it at the house I picked up 2 months ago for $120 used.
Few weird things, it has some scuffs. One on the barrel, a couple on the stock. The magazine held 6 rounds immediately. The bore patches came out pretty dirty on a new gun. I still took it home, but I'm hoping it shoots well.
I picked up some low rings while I was there. I had a Nikon P-300 waiting for it at the house I picked up 2 months ago for $120 used.
Re: 300 BLK Bolt gun picture thread
Tikka T3 300BLK all weather hunter
12" 1:7 stainless steel
Oceania Defence. AR10/300BLK Ti-can .3D printing technology
http://oceania-defence.com/index.php?ma ... x&cPath=41
12" 1:7 stainless steel
Oceania Defence. AR10/300BLK Ti-can .3D printing technology
http://oceania-defence.com/index.php?ma ... x&cPath=41
Re: 300 BLK Bolt gun picture thread
tikkablk wrote:Tikka T3 300BLK all weather hunter
12" 1:7 stainless steel
Oceania Defence. AR10/300BLK Ti-can .3D printing technology
http://oceania-defence.com/index.php?ma ... x&cPath=41
Hello, I have just finished a 300BLK built on a Tikka 595 action (16" 7 twist and ASE Utra SL7). It was built on an old .222. I have experienced ejection problems, i.e. the case ends up facing the wrong way inside the action rather than being flung out of the action. have you had this issue ? if so what was your solution ?
Re: 300 BLK Bolt gun picture thread
My T3 seems to feed and eject flawlessly but I did ask that of the gunsmith when they built it.Akira wrote:tikkablk wrote:Tikka T3 300BLK all weather hunter
12" 1:7 stainless steel
Oceania Defence. AR10/300BLK Ti-can .3D printing technology
http://oceania-defence.com/index.php?ma ... x&cPath=41
Hello, I have just finished a 300BLK built on a Tikka 595 action (16" 7 twist and ASE Utra SL7). It was built on an old .222. I have experienced ejection problems, i.e. the case ends up facing the wrong way inside the action rather than being flung out of the action. have you had this issue ? if so what was your solution ?
-
- Member
- Posts: 17
- Joined: Sun Sep 07, 2014 7:27 pm
Who is online
Users browsing this forum: No registered users and 33 guests