Scope for Rem Mod 7

Moderators: gds, bakerjw, renegade

Post Reply
Jim R
New Member
Posts: 6
Joined: Wed Jan 02, 2008 11:07 pm
Location: east tenn

Scope for Rem Mod 7

Post by Jim R » Mon Feb 04, 2013 5:11 pm

For you guys that are already shooting this rig, what are you scoping it out with? I will primarily be shooting subs to paper and metal, perhaps some deer depending on the situation. Thanks, Jim R

BulletFlight for Android
User avatar
2bad4u2
Silent But Deadly
Posts: 326
Joined: Sun Jun 05, 2005 6:35 pm

Re: Scope for Rem Mod 7

Post by 2bad4u2 » Mon Feb 04, 2013 5:22 pm

Hard to beat a good 3x9 to 3x12 scope with target turrets for versatility. Lots of chiice in the market. Make sure to look for one with a lot of elevation adjustment and mil-dots for hold over if you're so inclined. Stick with 1/4 adjustments. 1/8 are a pain in the ass for what you want to do. You'll likely end up with a 30mm tube if you can't find a 1" with enough elevation adjustment.

Jim R
New Member
Posts: 6
Joined: Wed Jan 02, 2008 11:07 pm
Location: east tenn

Re: Scope for Rem Mod 7

Post by Jim R » Mon Feb 04, 2013 9:10 pm

I was already leaning towards a reticle like that of the Rapid Z offered with Zeiss or maybe the Horus. I have a spare Zeiss in a 4.5-14 but to me that is like putting a 200hp motor on a 15ft bass boat......Thanks for the reply. I will keep pondering a bit.

User avatar
SC-Texas
Member
Posts: 29
Joined: Wed Nov 30, 2005 5:36 pm
Location: Houston, TX
Contact:

Re: Scope for Rem Mod 7

Post by SC-Texas » Tue Feb 05, 2013 11:41 pm

I was thinking a primary arms 4-14 with a mil dot reticle.

I woud hope it woud be easy to Zero and find holdovers.
Anyone know the crossover for supersonic zeroed subsonic zero?
http://www.TexasNFATrust.com
http://www.TexasGunTrust.com

NFA Gun Trusts For Citizens of Texas

shootz
New Member
Posts: 3
Joined: Thu Nov 22, 2012 11:14 am

Leupy 3-9x40 VX2

Post by shootz » Wed Feb 20, 2013 1:26 am

Found one with Leupolds version of a german post (really just a heavy duplex with the top bar missing)

horstie
Member
Posts: 39
Joined: Fri Feb 05, 2010 10:43 am
Location: Aulander,NC

Re: Scope for Rem Mod 7

Post by horstie » Wed Feb 20, 2013 7:58 pm

I'm using a Vortex 3.5 x 10 x50 with a BDC reticle....so far I'm liking it....

Post Reply