Hmmmm, they list the cartridge as 7.62x35 but it isn't 300 BLK. It looks like 7.62x54R cut down.
http://arms.am/index.php/our-production ... -cartridge
Bolt Action SBR Project
Moderators: gds, bakerjw, renegade
-
- Silent But Deadly
- Posts: 349
- Joined: Thu Dec 22, 2011 9:03 pm
Re: Bolt Action SBR Project
Here's another option for a stock: http://mdttac.com/mdt-lss-chassis-for-savage.html
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]
Re: Bolt Action SBR Project
Hmmmmmmm.......? Looks to be a true --> "rimmed". --- pruhdlr
Why just dance when you can "rock and roll".
STONER 63A / XM177E2
STONER 63A / XM177E2
Re: Bolt Action SBR Project
It could be a rimmed version of the Whisper or Blackout.Suputin221 wrote:Hmmmm, they list the cartridge as 7.62x35 but it isn't 300 BLK. It looks like 7.62x54R cut down.
http://arms.am/index.php/our-production ... -cartridge
Many Contender and Encore 300 Whisper shooters had a rim recess cut in the chamber of their barrels.
All they had to do was run a .357 MAX case into a Whisper or 300/221 die and trim the case to length.
This resulted in a rimmed version of the Whisper that was a little easier to pull out of the chamber.
After the conversion they could shoot either the rimmed or rimless version.
Also, if you didn't mind a short neck, you could form them out of .357 Magnum brass.
M.
THANKS! TO THE AMERICAN VOTERS FOR DEFEATING CLINTON AND MAKING TRUMP OUR PRESIDENT!
- bangbangping
- Silent But Deadly
- Posts: 2695
- Joined: Sun Sep 15, 2013 6:34 pm
- Location: Texas Gulf Coast
Re: Bolt Action SBR Project
It's a Model 10 action, right? That's what needs to go on the form, and on the receiver if you go that route. I wouldn't confuse things by trying to invent a model number.SuperChuck wrote:OK already run into a dis-similarity trying to use AR style form 1 with this build....
Savage receiver only has Serial number marked on the frame. NO model number, NO Caliber..
Should I have these added to the receiver when I engrave my trust information?
I realize the barrel may be marked, with caliber, but it will not be marked for Model.
At this point, should/could I could call it
SuperChuck TRust
MyHomeTown, SC
SBR-1
300 Blk
SC
-
- Silent But Deadly
- Posts: 349
- Joined: Thu Dec 22, 2011 9:03 pm
Re: Bolt Action SBR Project
I'm really not sure how you can look at that pic and see 300 BLK. The BLK has a very small shoulder where the round above has a prominent shoulder.80hp wrote:It could be a rimmed version of the Whisper or Blackout.Suputin221 wrote:Hmmmm, they list the cartridge as 7.62x35 but it isn't 300 BLK. It looks like 7.62x54R cut down.
http://arms.am/index.php/our-production ... -cartridge
Many Contender and Encore 300 Whisper shooters had a rim recess cut in the chamber of their barrels.
All they had to do was run a .357 MAX case into a Whisper or 300/221 die and trim the case to length.
This resulted in a rimmed version of the Whisper that was a little easier to pull out of the chamber.
After the conversion they could shoot either the rimmed or rimless version.
Also, if you didn't mind a short neck, you could form them out of .357 Magnum brass.
M.
-
- New Member
- Posts: 8
- Joined: Tue Feb 08, 2022 3:26 pm
Re: Bolt Action SBR Project
Hmmmm, they list the cartridge as 7.62x35 but it isn't 300 BLK. It looks like 7.62x54R cut down.SuperChuck wrote: ↑Sun Apr 01, 2012 9:03 pm I'm about to Form 1 a Savage Bolt Action to start a compact bolt action build.
My criteria is below:
1. Planned to fire both sub-sonic and super-sonic rounds.
2. Planned to run suppressed and unsuppressed.
3. Want max barrel length with suppressor to remain 20" or less currently.
4. Right now its a blind mag, staggered feed 5 capacity I prefer to maintain the repeater action, but may be satisfied with a single-shot follower in a pinch.
Where I am at so far:
1. I own multiple SS and Blued Savage 10 actions, right now I'm expecting to use an SS action thats been timed and trued, with SSS trigger installed.
2. Action is currently set up for .473 bolt head (.308 cartridge family) needs to be converted to .378 cartridge head.
3. I have 2 of the Gunshack 16.5" SS 1:8" twist, Varmint contour 300 Blackout barrels ordered
4. I've started a Form 4 on a Liberty Mystic that should mail out early this week
5. I have the various tools for barrel installation, as well as the Go/o Go headspace gauges.
Next steps:
1. Once I commit to a specific action out of the safe, I'll begin the form 1 paperwork and send the action out for engraving (I'll need to establish a final barrel length)
2. Once the Form 1 is approved, I'll have one barrel cut down. Until then I'll play with it at the full 16.5" length
3. The action needs to be converted to .378 - I already have all the parts to do it.
4. During the bolt head changeout, I will probably need to upgrade the plunger/ejector system to kick out the short cartridges properly
5. Performing those changes, once the bolt's been converted, I can use it as a full length until I get my Stamp.
So, from anyones past experiences, any additional details I need to make sure to cover at this point?
Anyone used a bolt action barrel in the 10-12" range? Any recommendations/observations?
Anyone thats already been down this road already and have any pointers, I'll be glad to hear from you.
Regards,
SC
Who is online
Users browsing this forum: No registered users and 17 guests