Barrel Wrench with longer pins

Moderators: gds, bakerjw, renegade

Post Reply
Boolit_Head
Silent But Deadly
Posts: 349
Joined: Tue Aug 23, 2016 7:15 pm

Barrel Wrench with longer pins

Post by Boolit_Head »

I am looking for a barrel wrench with longer pins. I have a Wheeler combo wrench but find it a bit lacking and hard to keep lined up straight in the holes while torquing on it. I've found the BRDE wrench but it's a touch pricey at $50. Will the 8 pin setup will work with most nuts?

http://brdengineering.com/products/brde-barrel-wrench

Any other wrenches with longer pins that might be a touch cheaper?
CPC24
Silent Operator
Posts: 69
Joined: Thu Mar 26, 2015 2:16 pm

Re: Barrel Wrench with longer pins

Post by CPC24 »

I tried the Wheeler and it didn't work very well. I then got one from
Brownells for a lot less.
http://www.brownells.com/gunsmith-tools ... 27412.aspx
Boolit_Head
Silent But Deadly
Posts: 349
Joined: Tue Aug 23, 2016 7:15 pm

Re: Barrel Wrench with longer pins

Post by Boolit_Head »

I looked at that one but was really thinking the longer pins might be nice.
Post Reply

Who is online

Users browsing this forum: No registered users and 62 guests