10.5" barrel with 1:7 twist or faster?

Moderators: gds, bakerjw, renegade

Post Reply
MsJenfface
New Member
Posts: 1
Joined: Tue Jun 18, 2019 12:15 am

10.5" barrel with 1:7 twist or faster?

Post by MsJenfface »

I'm working on building a suppressed SBR, and am trying to find a 300 blk barrel that is:

10.5" long

1:7 twist or faster (mostly going to be shooting subs out of it, and want to be able to stabilize everything)

Isn't stainless steel

And doesn't cost a fortune.

Is there anything out there that fits that criteria? I've looked at BA, faxon, SOLGW, etc., but can't find anything. Weight is a factor, but not a big deal
User avatar
bangbangping
Silent But Deadly
Posts: 2695
Joined: Sun Sep 15, 2013 6:34 pm
Location: Texas Gulf Coast

Re: 10.5" barrel with 1:7 twist or faster?

Post by bangbangping »

How much is a fortune?
alamo5000
Silent But Deadly
Posts: 213
Joined: Tue Jun 05, 2018 8:01 pm

Re: 10.5" barrel with 1:7 twist or faster?

Post by alamo5000 »

What's the story on 'not stainless steel'?

I've seen/watched/listened to/ and even talked to some of the biggest barrel makers and today''s stainless steel and your grandpa's stainless steel are not the same thing.

I have a stainless steel 5.56 10.5" barrel and I spoke to the manufacturer way back when and I asked about the life of the barrel... they asked me a series of questions and told me that I could expect (on my firing schedule) around a 15,000 round barrel life, maybe more.

Today's modern alloys and all that killed almost all of the traditional stories about 'stainless steel'. I would figure shooting subs out of a 300 BLK with a good quality stainless barrel on a the basis of being a hobby shooter (not a professional who does it every single day) you could get similar barrel life if not better.
User avatar
dellet
Silent But Deadly
Posts: 6967
Joined: Fri Nov 30, 2012 1:25 pm

Re: 10.5" barrel with 1:7 twist or faster?

Post by dellet »

It does seem to be a harder combination to find, but not uncommon. MAS defense is reasonable quality and in stock. Ballistic advantage makes them but are hard to find for some reason.

https://www.masdefense.com/product-p/mas00124306.htm
300 Blackout, not just for sub-sonics.
User avatar
plant.one
Silent But Deadly
Posts: 6823
Joined: Tue Jun 23, 2009 8:31 pm
Location: Oakland County, MI

Re: 10.5" barrel with 1:7 twist or faster?

Post by plant.one »

without knowing what you consider "a fortune".....

if you decide you want one in stainless after too much searching for a non stainless barrel - bear creek has one available.

https://www.bearcreekarsenal.com/bca-ar ... -1-7-twist




the only non-stainless offering of theirs i see that meets most of your criteria is a 1:8 twist parkerized barrel - which should stabilize damn near everything

https://www.bearcreekarsenal.com/bca-ar ... -1-8-twist


they also offer it as a complete upper for under $200 - just add sights and pin to your lower
https://www.bearcreekarsenal.com/bca-ar ... -w-10-mlok


hth
Reloading info shared is based on experiences w/ my guns. Be safe and work up your loads from published data. Web data may not be accurate/safe.
This disclaimer will self destruct in 10 seconds.
bamashooter
Member
Posts: 31
Joined: Sun Jan 06, 2019 3:39 pm
Location: Alabama

Re: 10.5" barrel with 1:7 twist or faster?

Post by bamashooter »

Cheap. I've seen many more good reviews than bad on their products. Not familiar with them. https://www.cbcindustries.com/products/ ... 0-aac-1-8/
bamashooter
Member
Posts: 31
Joined: Sun Jan 06, 2019 3:39 pm
Location: Alabama

Re: 10.5" barrel with 1:7 twist or faster?

Post by bamashooter »

Just curious. Have you found a barrel to your liking?
Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests