New 300 Blackout completed

Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.

Moderators: gds, bakerjw, renegade

User avatar
rogue884
New Member
Posts: 7
Joined: Mon Mar 16, 2009 10:43 pm
Location: Florida/ Louisiana

New 300 Blackout completed

Post by rogue884 » Fri Apr 01, 2011 7:52 pm

Here it is, just put together. Need to test fire and afix sights. And yes, there is a barrel in there . . . LOL

Image

BCM registered lower
BCM upper
BCM FA BCG
BCM Mod4 charging handle
Noveske 10"
Seekin's BAR

And with my Cyclone K to top it off

Image
That sucking chest wound is nature's way of telling you to slow the fuck down!

BulletFlight for Android
trenttyre
Silent But Deadly
Posts: 202
Joined: Fri Mar 04, 2011 12:26 pm

Re: New 300 Blackout completed

Post by trenttyre » Fri Apr 01, 2011 10:30 pm

Very nice! I would love to see a picture of the muzzle. is the rail 10" or the barrel? and what FH or comp did you use?

User avatar
rogue884
New Member
Posts: 7
Joined: Mon Mar 16, 2009 10:43 pm
Location: Florida/ Louisiana

Re: New 300 Blackout completed

Post by rogue884 » Fri Apr 01, 2011 11:10 pm

No flash hider or brake, the Cyclone K is a single point can. The rail is just a bit over 10", and the barrel is 10", so the can recesses in the rail almost an inch when threaded onto the barrel.

Image
That sucking chest wound is nature's way of telling you to slow the fuck down!

Sumsky
New Member
Posts: 1
Joined: Sun Jul 25, 2010 10:37 pm

Re: New 300 Blackout completed

Post by Sumsky » Tue May 03, 2011 8:03 pm

That is on nice set up! What Rail is that? I like when Cans are recessed into the Rails. It just gives the weapon a nice clean look, in my opinion.

trenttyre
Silent But Deadly
Posts: 202
Joined: Fri Mar 04, 2011 12:26 pm

Re: New 300 Blackout completed

Post by trenttyre » Tue May 03, 2011 8:18 pm

Sumsky wrote:That is on nice set up! What Rail is that? I like when Cans are recessed into the Rails. It just gives the weapon a nice clean look, in my opinion.

I agree. it just makes it look mean!

BriggsRi
Member
Posts: 25
Joined: Mon Jan 07, 2008 6:26 pm
Location: Las Vegas, NV

Re: New 300 Blackout completed

Post by BriggsRi » Tue May 03, 2011 8:42 pm

Video, Video, Video... :mrgreen:

Nice looking rifle!

horstie
Member
Posts: 39
Joined: Fri Feb 05, 2010 10:43 am
Location: Aulander,NC

Re: New 300 Blackout completed

Post by horstie » Wed May 04, 2011 6:39 pm

What are the plans for optics?????



I'm not jealous..really I'm not

Great looking rifle :D

loki*hunter
Senior Silent Operator
Posts: 110
Joined: Sun Apr 03, 2011 7:33 pm

Re: New 300 Blackout completed

Post by loki*hunter » Wed May 04, 2011 11:33 pm

rogue884 wrote:No flash hider or brake, the Cyclone K is a single point can. The rail is just a bit over 10", and the barrel is 10", so the can recesses in the rail almost an inch when threaded onto the barrel.

Image

If you don't mind me asking...how tight is the can in the floating tube? It looks like you would only have about 1/8" clearance around the tube....are you seeing any contact marks after firing? Just interested to see if the harmonics are going to cause accuracy problems...

Thanks

User avatar
JasonAAC
Industry Professional
Posts: 214
Joined: Thu Jul 02, 2009 4:08 pm
Location: VA
Contact:

Re: New 300 Blackout completed

Post by JasonAAC » Thu May 05, 2011 10:48 am

loki*hunter wrote:If you don't mind me asking...how tight is the can in the floating tube? It looks like you would only have about 1/8" clearance around the tube....are you seeing any contact marks after firing? Just interested to see if the harmonics are going to cause accuracy problems...

Thanks
If your SBR barrel is flexing 1/8" or more in any direction, you have serious problems. OP's rig will be fine.
Kick Ass Design

User avatar
lsstokes
New Member
Posts: 6
Joined: Fri Jan 29, 2010 4:47 pm
Location: NE, Texas

Re: New 300 Blackout completed

Post by lsstokes » Thu May 05, 2011 10:59 am

+1 very, very, nice! :D

What Rail? I plan on getting a Noveske 10" - 300 blk and love the look of that. Can you tell me the ID of the rail?
"The true soldier fights not because he hates what is in front of him, but because he loves what is behind him" G.K. Chesterson

Post Reply