reloading 300 blackout for subsonic and supersonic
Moderators: gds, bakerjw, renegade
- LYNRDSKYNRD
- Silent Operator
- Posts: 85
- Joined: Wed Jan 26, 2011 5:31 pm
- Location: Heart of Dixie
Re: reloading 300 blackout for subsonic and supersonic
"That'll do pig.....that'll do"
"People sleep peaceably in their beds at night only because
rough men stand ready to do violence on their behalf."
George Orwell
rough men stand ready to do violence on their behalf."
George Orwell
Re: reloading 300 blackout for subsonic and supersonic
Winchester is a great powder for the 300-221.
I will dig my data out and report back. Seems it was 242 or 246 that was great for the research I did years back.
H110 was a close second.
I will dig my data out and report back. Seems it was 242 or 246 that was great for the research I did years back.
H110 was a close second.
"Buzzards gotta eat, same as worms."
-
- Member
- Posts: 16
- Joined: Fri Nov 20, 2009 11:54 pm
- Location: Bonney Lake, WA
- Contact:
Re: reloading 300 blackout for subsonic and supersonic
I just purchased a 10" Noveski upper (300Blackout), and am waiting on my stamps for my 762 SD.
I played with some numbers in the computer, and wondered if anybody has tried some Blue Dot?? The program says in a 10" barrel and some 200 Gr. Matchking bullets if I load 6.5 Gr and should see 1040 fps and 100% burn. Should be easy on the can.
Anybody tried Blue Dot?
I played with some numbers in the computer, and wondered if anybody has tried some Blue Dot?? The program says in a 10" barrel and some 200 Gr. Matchking bullets if I load 6.5 Gr and should see 1040 fps and 100% burn. Should be easy on the can.
Anybody tried Blue Dot?
Re: reloading 300 blackout for subsonic and supersonic
the question is would it generate enough pressure and gas to cycle the action ... few people have tried similar powders and got good velocities , but cycling an ar is a different animal all together .. please try some and let us know !!!
-------------------------------------------------------
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales
Re: reloading 300 blackout for subsonic and supersonic
Subsonic powders that seem ok for 210+ grain bullets are:
A1680
Re-7 - may not fit depending on your OAL and bullet.
H-4198 (if your measure can handle it. My Harrells does not drop it well).
I don't think lighter bullets are a great idea for the AR.
A1680
Re-7 - may not fit depending on your OAL and bullet.
H-4198 (if your measure can handle it. My Harrells does not drop it well).
I don't think lighter bullets are a great idea for the AR.
-
- Silent But Deadly
- Posts: 772
- Joined: Tue Nov 02, 2010 10:56 am
- Contact:
Re: reloading 300 blackout for subsonic and supersonic
You might add
4227
4895
2230C
N116
I havent got to try them extensively yet, but I think I can also make the following powders run subsonic and cycle,
Ramshot (cant remember if it was enforcer or exterminator, whichever is in the burnrate of the above powders.)
2016
Data 68
N133
3031
Ill be coming up with data for all the above and publishing it here.
Also, for those of you with a little shorter gas systems, 2400 does very well, and is quieter than the powders above.
4227
4895
2230C
N116
I havent got to try them extensively yet, but I think I can also make the following powders run subsonic and cycle,
Ramshot (cant remember if it was enforcer or exterminator, whichever is in the burnrate of the above powders.)
2016
Data 68
N133
3031
Ill be coming up with data for all the above and publishing it here.
Also, for those of you with a little shorter gas systems, 2400 does very well, and is quieter than the powders above.
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Re: reloading 300 blackout for subsonic and supersonic
4895 may not fit except with lighter bullets.
4227 may be good.
It would be nice for someone to do a public test with 50 round standard deviations of each of them loaded to 1000 fps.
4227 may be good.
It would be nice for someone to do a public test with 50 round standard deviations of each of them loaded to 1000 fps.
-
- Silent But Deadly
- Posts: 772
- Joined: Tue Nov 02, 2010 10:56 am
- Contact:
Re: reloading 300 blackout for subsonic and supersonic
Ive been able to get some 220's to cycle with 4895.
when I get out of the hospital and have nothing better to do in my wheel chair, I am going make an entire load data manual for the BLK with rediculous diversity, about 20 different powders, oodles of bullet types and weights, and a gell test for each one.
when I get out of the hospital and have nothing better to do in my wheel chair, I am going make an entire load data manual for the BLK with rediculous diversity, about 20 different powders, oodles of bullet types and weights, and a gell test for each one.
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Re: reloading 300 blackout for subsonic and supersonic
What would be nice is for your book to load each subsonic powder to 1000 fps, and report the cyclic rate of each one with a certain buffer. This is important because someone might report a load as 'it cycles' but it may be 600 rpm. Colt M4 specs are 700-970 rpm, and 600 will be less reliable when cold or dirty.
-
- Silent But Deadly
- Posts: 772
- Joined: Tue Nov 02, 2010 10:56 am
- Contact:
Re: reloading 300 blackout for subsonic and supersonic
True, Ill get it as detailed as I can. I have a history of halucinating when on morphine for extended periods of time, this should be interesting.
Regards,
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Aaron Fouraker
Co-Owner
Delta Company Arms, LLC
(918) 332-6503
[email protected]
www.deltacompanyarms.com
IN GOD WE TRUST.
Who is online
Users browsing this forum: Amazon [Bot], Bing [Bot], Semrush [Bot] and 70 guests