So I bought a Lyman double-caviity mold for a 210 grain round nose, gas-checked bullet. I hope to achieve a velocity of around 1050 fps. I'm using Hodgdon CFE BLK powder.
I recently loaded a Nosler 210 grain HPBT with 11.8gr at an OAL of 2.250" and go excellent results. Is this a good starting point? Or not applicable.. thanks in advance.
Lyman item # 2660284
Can't find load data / 210gr Cast RN for 300 blk
Moderators: gds, bakerjw, renegade
-
- Member
- Posts: 19
- Joined: Fri May 29, 2020 2:36 pm
- cwlongshot
- Silent But Deadly
- Posts: 1128
- Joined: Sat Oct 18, 2014 7:53 pm
- Location: Connecticut
Re: Can't find load data / 210gr Cast RN for 300 blk
I use the older 311284 in a HP and usually use 1680. As its my preferred for heavy bullets in the black out.
Is your mold a Gas Check or Plain base? Generally unless your casting rock hard bullets lower pressures are desired for cast. A GC helps in this regard.
I shoot this bullet best just super sonic. I also cast it in 20:1 alloy and it expands and penetrates real
Well at 1250 fps for me.
CW
Is your mold a Gas Check or Plain base? Generally unless your casting rock hard bullets lower pressures are desired for cast. A GC helps in this regard.
I shoot this bullet best just super sonic. I also cast it in 20:1 alloy and it expands and penetrates real
Well at 1250 fps for me.
CW
A Bolt, Single Shot and a few M$Rs
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Join me on RUMBLE! Https://rumble.com/user/cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Who is online
Users browsing this forum: Google [Bot] and 129 guests