300BlkTalk

So heres my backstory to why im starting a 300 blk pistol build. I went hog hunting this weekend and usually take my scar 17s with my aac 762sdn6. Usually its been ok but on this particular trip i found it to be way too long and way too heavy for what i needed it for. I have a colt m4 but wanted something to bridge the gap. I wanted the stopping power of a .30 caliber but in a small and lightweight system which is why i am here. I have 2 suppressors which i will have to ultimately decide which one ill be using on my 300blk. I have the AAC sdn6 and a silencerco osprey 45 and plan to shoot subsonic ammo primarily with my build for hunting.

I am looking to build a 8-9" barreled upper pistol with one of my silencers. Any recommendations on barrel length and which suppressor would be best? I know that my osprey 45 should only be used with subsonic ammo so i am leaning towards using the sdn6. I am trying to do all the research i can before buying any parts but am also leaning towards an aero m4e1 builder set to start out with.

Any opinions or recommendations are appreciated. Thanks.

First, welcome.

TX_Lee wrote:Any opinions or recommendations are appreciated.

My opinion is that I wouldn't shoot hogs with a BLK sub. Personally, I'd go with the 9", the SDN-6, and a good super load. Do you handload?

bangbangping wrote:First, welcome.

TX_Lee wrote:Any opinions or recommendations are appreciated.

My opinion is that I wouldn't shoot hogs with a BLK sub. Personally, I'd go with the 9", the SDN-6, and a good super load. Do you handload?

I used to with 308 rounds for my scar but i stopped due to it taking up too much of my time. I probably wont be going back to doing hand loads.

Welcome aboard.