Hello, New Here.

Discussion about rifles in 300 AAC BLACKOUT (7.62x35mm), hosted by the creator of the cartridge.

Moderators: gds, bakerjw, renegade

Post Reply
ATIII
New Member
Posts: 2
Joined: Fri Jun 02, 2017 3:09 pm

Hello, New Here.

Post by ATIII »

Just wanted to introduce myself, I'm Tony. Starting my first 300 build, and am here to learn. I've done a few AR's now, so I'm not a total noob, but am to this round.
Top
User avatar
walnutz
Silent But Deadly
Posts: 225
Joined: Sat May 31, 2014 3:08 pm
Location: Great State of Texas

Re: Hello, New Here.

Post by walnutz »

Welcome Tony,

You are setting yourself up for a lot of fun. Enjoy!!!
Top
User avatar
jgillaspy
Member
Posts: 43
Joined: Mon Dec 30, 2013 5:45 pm
Location: San Antonio, TX

Re: Hello, New Here.

Post by jgillaspy »

Welcome to the addiction!
Be Fluid; Flexible is too rigid
Ago Servio
Top
User avatar
rebel
Silent But Deadly
Posts: 7285
Joined: Mon Apr 22, 2013 2:01 pm
Location: Moonshine Country

Re: Hello, New Here.

Post by rebel »

ATIII wrote:Just wanted to introduce myself, I'm Tony. Starting my first 300 build, and am here to learn. I've done a few AR's now, so I'm not a total noob, but am to this round.
Welcome sir! Have you assembled your components yet?
You can't beat the mountain, pilgrim. Mountains got its own way.
Top
tallburnedmidget
Silent But Deadly
Posts: 3808
Joined: Wed Jun 13, 2012 9:01 pm

Re: Hello, New Here.

Post by tallburnedmidget »

ATIII wrote:Just wanted to introduce myself, I'm Tony. Starting my first 300 build, and am here to learn. I've done a few AR's now, so I'm not a total noob, but am to this round.
Welcome and prepare for a fun journey! :)
Top
ATIII
New Member
Posts: 2
Joined: Fri Jun 02, 2017 3:09 pm

Re: Hello, New Here.

Post by ATIII »

I've got most of my parts together. Just got to send it off to Cerikote before I start assembly. I do have a barrel question. I believe my barrel is drilled with a .074" gas hole. It's a 7.5" barrel that I don't plan on suppressing. Basically building a little fire breathing, loud AF range toy. Now can/should I drill the barrel's gas port out to say .1, and use an Odin adjustable GB to dial it in perfectly? Ive read all kinds of crap about 7.5's not wanting to run right, so I figured this might alleviate some problems from jump. I'm also planning on running an H2 or T2 buffer.
Top
Guges Mk3
Member
Posts: 29
Joined: Sun Jun 04, 2017 3:09 pm

Re: Hello, New Here.

Post by Guges Mk3 »

Hello,

New here also...
Top
User avatar
cwlongshot
Silent But Deadly
Posts: 1128
Joined: Sat Oct 18, 2014 7:53 pm
Location: Connecticut

Re: Hello, New Here.

Post by cwlongshot »

WELCOME Tony!!

Its a great cartridge. Hang on!!

CW
A Bolt, Single Shot and a few M$Rs

Join me on RUMBLE! Https://rumble.com/user/cwlongshot

https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw

I PROUDLY SUPPORT LAW ENFORCEMENT & OUR TROOPS
Top
hardcase
Silent But Deadly
Posts: 1020
Joined: Thu Jul 04, 2013 9:07 pm

Re: Hello, New Here.

Post by hardcase »

ATIII wrote:I've got most of my parts together. Just got to send it off to Cerikote before I start assembly. I do have a barrel question. I believe my barrel is drilled with a .074" gas hole. It's a 7.5" barrel that I don't plan on suppressing. Basically building a little fire breathing, loud AF range toy. Now can/should I drill the barrel's gas port out to say .1, and use an Odin adjustable GB to dial it in perfectly? Ive read all kinds of crap about 7.5's not wanting to run right, so I figured this might alleviate some problems from jump. I'm also planning on running an H2 or T2 buffer.
Do you handload?
Top
Smbob
Member
Posts: 20
Joined: Sun May 21, 2017 9:17 pm

Re: Hello, New Here.

Post by Smbob »

Hey Tony

Image

New here myself. Lots of great info and nice folks here as well!

Robert
Top
Post Reply

Return to “Main Discussion Area”



Who is online

Users browsing this forum: Amazon [Bot] and 85 guests