300BlkTalk

Uniform and deburr the flash holes. That is one thing I still do to every case. Doing it made the single biggest difference when I used to shoot groups. Case fill is also very important because powder position can impact velocity. I tested loads by first loading then pointing the muzzle at the groun...

Sounds like I may be done with these then. It already takes nearly 2 hours for 50 rounds, and thats without adding another handful of steps. I don't have that kind of time. The only additional step should be belling the case mouth. Everything else is just a matter of adjusting the die to remove the...

Are you belling the case mouth before seating? These, like all cast bullets, need a bell on the case mouth. If not the coating, and diameter, can be removed causing stability issues. If you have IMR 4227 I would try 10 grains then go up or down from there. I would start with the overall length you a...

That is mine. ACME makes them then distributes them to the various vendors online.

My sweet wooden crate of 100 came in last night. Will see about preppong some brass tonight but I have a weekend getaway coming up I still haven't even begun to pack for...so that takes precedence. I like that they're noticeably shorter than 208 ELD, as that indicates they may stabilize out of my 6...

https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/70789286_2671328842878478_9171194472040497152_o.jpg?_nc_cat=108&_nc_oc=AQkj3Su5xyrT-sgA23MQFe3SEMyyxq2nFKIxxzYGkIrDMYhufUZlAKKpn4ctdIdZ_5KIRXxin-cqVCgvYwOC9VWL&_nc_ht=scontent-atl3-1.xx&oh=e1a160c0d255e92897ed82a5a09ff195&oe=5E07D633 I h...

Fixed PDW length stock, 8”. Apparently made by YHM. Never seen one before. https://scontent-atl3-1.xx.fbcdn.net/v/t1.15752-9/68749871_638610263301117_6244799899112570880_n.jpg?_nc_cat=105&_nc_oc=AQm08PacryvWqLgRcUBY_k8IW2DxB-AtA0nw0qqlSI3Uc_Ap5FP13KW64nQ3UVVCZotyiVlAOAg9nz4jFUzOn3bT&_nc_ht=s...

Bought new a month ago but now I am upgrading so I no longer need. Everything is there and it works like it should.

$80 shipped

I have used most of them but never heard of Si-goggling. I grew up on the side of a mountain and will die within 500 feet of where I grew up. I know every square inch of this mountain as I walked it as a kid while playing and hunting. I was probably 7 when I first started hunting for food. I would g...

With an adjustable gas block you can use lightweight parts. No need to run a heavy buffer. Use the adjustable gas block to tune the cycling instead of the buffer.