Search found 53 matches

by Saxon
Mon Jul 13, 2020 10:09 pm
Forum: Handloading
Topic: flattening primers, primers pushing out? 150 grain bullet, 16.0 Grains imr 4227
Replies: 14
Views: 2407

Re: flattening primers, primers pushing out? 150 grain bullet, 16.0 Grains imr 4227

Sierra, Speer, horandy etc etc 150 grain bullets are not all the same as far as seating depth, horady range from 1.096 to 1.203 and 16.3 is highest load for 4227 150 grain speer .920 to 1.170 sierra .895 to 1.110 if you make a load for a short 150 grain and you then try to use that load for a longer...
by Saxon
Fri Jul 03, 2020 12:02 am
Forum: Handloading
Topic: Help with bullet weight and uses.
Replies: 16
Views: 2434

Re: Help with bullet weight and uses.

i also have a 16", carbine length gas, 1/8 twist i load supers and subs for real world i shoot hornady black 110 v max sierra 110 HP can be loaded to the same trajectory real easy for reloading, i also like shooting plinking subs you can load down far enough (depending on bullet and powder) tha...
by Saxon
Wed Jul 01, 2020 12:58 am
Forum: Handloading
Topic: Good 110gr general rifleman training bullet?
Replies: 2
Views: 818

Re: Good 110gr general rifleman training bullet?

sierra 110 HP load data for 300 blackout will get you very close to hornady black v max 110 MOA and trajectory
by Saxon
Wed Jun 17, 2020 2:01 am
Forum: Main Discussion Area
Topic: 300BO 16" sound level
Replies: 4
Views: 1467

Re: 300BO 16" sound level

i could if the liquid sunshine ever stopped, in Oregon.
by Saxon
Mon Jun 15, 2020 11:41 pm
Forum: Main Discussion Area
Topic: 300BO 16" sound level
Replies: 4
Views: 1467

Re: 300BO 16" sound level

180 grain FMJ 16" barrel carbine gas no noticeable ringing to ears when shot no corno but probably should be around 1000 to 1100 fps
no BHO and FTF half the time.

180 grain FMJ 10.5" barrel pistol gas no crack but noticeable ringing yes to BHO and feeds every time
by Saxon
Wed May 27, 2020 12:58 am
Forum: Classified Ads
Topic: Error in description, listing pulled - please close
Replies: 2
Views: 1183

Re: Pair of (2x) New Frontier Armory LW-15 Complete Polymer Lowers

photo missing but i am interested
by Saxon
Sat Apr 11, 2020 12:54 am
Forum: Main Discussion Area
Topic: Sighting a scope in for subs and supers?
Replies: 26
Views: 8705

Re: Sighting a scope in for subs and supers?

Mostly, be using it for hunting. I like to be accurate, but there is no need to be within 1/2" at 100 yds. If I know I am dead on with the 110 blacktips at a 100yds and a set number of clicks brings the subs to 1" high or low at 100yds, that will be awesome. Has anyone tweeked the powder ...
by Saxon
Sat Apr 11, 2020 12:50 am
Forum: Handloading
Topic: lee Powder measures?
Replies: 9
Views: 1772

Re: lee Powder measures?

Lee Powder measure i have that style,,, that being said have a scale.
adjust the drop till the scale says your are on your target load, then start loading,
i check every 10 for variance/
by Saxon
Mon Apr 06, 2020 11:17 pm
Forum: Handloading
Topic: New and having problems with bullet seating
Replies: 7
Views: 1125

Re: New and having problems with bullet seating

also are you seating and crimping in two separate steps?

just did a ladder of 150 sp interlock and all were spot on RCBS SB dies
by Saxon
Mon Apr 06, 2020 11:14 pm
Forum: Main Discussion Area
Topic: Sighting a scope in for subs and supers?
Replies: 26
Views: 8705

Re: Sighting a scope in for subs and supers?

i have the nikon P-300 2-7x32 super sub scope 16" barrel carbine gas zero is hornady black 110 vmax 100 yards all others i go on line where you can put it your load and it shows the scope on 2 through 7 magnification and the bullet drop on each site graduation, i then copy that down on a 3x5 an...