300BlkTalk

Got a chance this weekend to use this bullet on a doe. 125 yards. Perfect broadside shot. Missed ribs going in, and going out. Still made a nice hole on exit wound. MV of 2100 fps https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/82184841_3012169125484699_641733449064906752_n.jpg?_nc_cat=109&_nc_ohc...

Purchased Omega 30 call 11/20/18 ATF cashed check on 12/13/18 . Stamp approved 12/01/19. Store received stamp 12/12/19. This was individual . I read this and I said to my self "this guy is FOS!!!!".... then I reread it and noticed the years.... so... I apologize for my behavior. I have an...

@rebel thanks. I sure wished I wouldn't have jumped the gun (pun intended) and got a good stock before hydro dipping. but... you get a new toy and you have extra cash in your pocket, and you turn into a 7 year old in a candy store. @dellet the first cold shot bore was still in play. I wasn't even wo...

I loaded up a few more yesterday and decided to see if there was a difference in the LC brass over the Lapua. Man was I surprised. I wont bore you with all the pictures, but the LC brass did as good or better than the Lapua brass. I knew between 22.0 and 22.5 is where I should be. Turns out 22.2 in ...

dellet wrote: ↑Fri Dec 27, 2019 7:56 pm Don't give up the fight

Wonder about the cold bore shift being velocity related. A relatively slow powder and a suppressor full of O2, might be worth a check.

[/quote]

How would I combat that?

Now I decide to do the ladder testing with loads from 21.0 - 23.0 grains. With my seating depth at 2.200" the 23.0 grains is forcing the bullet out of the neck, so I abandoned that powder charge, and only went to 22.6. My chrono reading were: 21.0 1960 fps 21.3 2000 fps 21.6 2040 fps 22.0 2040 ...

Just got back from the gun club, and got a little work done. I had to restock the Camo 700 since the smith that installed the new sling swivels, didn't take into account the heavier barrel I was using, and the barrel rubs. I tried to Dremel some of the bedding out, but I hit the alum plate, and I di...

Anyone know of a different ammo box than just the normal 223 boxes? I know it's petty, but I just hate the depth of the empty brass cases in the normal 223 ammo box. I would like the lip of the brass to set at least a fingernail higher than the wall. It makes it much easier to get the fired brass ou...

I was wondering why all your pics were not posting. I got 3 boxes of the Speer GD 150 BLK OUT bullets the other day. initial testing at 50 yards gave less that favorable groups, but I forgot I had stock issues (barrel is not free floating anymore after new sling swivels were put in). https://sconten...

dellet wrote: ↑Sat Sep 29, 2018 6:35 pm

1475 fps, tumbled, 22" penetration. I will try and drop a bit more, but that's probably getting close to minimum.

@Dellet
Going through this thread, and would like to see these photo's if you still have them.