Search found 64 matches
- Wed Dec 09, 2020 1:14 pm
- Forum: Handloading
- Topic: Speer reloading data
- Replies: 13
- Views: 3806
- Wed Dec 09, 2020 12:16 pm
- Forum: Main Discussion Area
- Topic: What are your zeros for 125 grain supers?
- Replies: 3
- Views: 4533
Re: What are your zeros for 125 grain supers?
I run a 40yd zero (2nd zero at 150yd). This puts me 2" high at 100yd and 2" low at 175yd.
- Tue Dec 08, 2020 11:14 pm
- Forum: Handloading
- Topic: Speer reloading data
- Replies: 13
- Views: 3806
Re: Speer reloading data
Just looked at my Speer phone app and it doesn't even list lil'gun as an option for 150gr bullets.
- Tue Dec 08, 2020 10:50 pm
- Forum: Handloading
- Topic: Speer reloading data
- Replies: 13
- Views: 3806
Re: Speer reloading data
My plinking load for 150gr FMJBT with lil'gun is 15.7gr. I've never tried pushing max pressure with it, but 20gr sounds really hot.
- Fri Nov 27, 2020 11:07 pm
- Forum: Main Discussion Area
- Topic: Happy thanksgiving
- Replies: 7
- Views: 1640
Re: Happy thanksgiving
Happy Thanksgiving!
- Fri Nov 27, 2020 10:56 pm
- Forum: Handloading
- Topic: Pistol Gas Sub Loads, Various Bullets & Powders
- Replies: 37
- Views: 52021
Re: Pistol Gas Sub Loads, Various Bullets & Powders
certifiable do you or have you tried the Nosler #51170 Ballistic Silvertip 30 Caliber 180 Grain Bullet i know it need at least 1800fps to expand but i have quite a few and was thinking of trying them Checking published data for 180gr bullets in 300Blk both Hornady and Sierra show the only powder to...
- Thu Nov 19, 2020 4:19 am
- Forum: Silencer Discussion
- Topic: Stubby form 1 build
- Replies: 4
- Views: 2942
Re: Stubby form 1 build
On my F1 build, I placed a baffle in the end cap.
http://www.silencertalk.com/forum/viewt ... 0&t=136387
I clipped all of the baffles since it is directly attached and I never shoot my SBR without it.
http://www.silencertalk.com/forum/viewt ... 0&t=136387
I clipped all of the baffles since it is directly attached and I never shoot my SBR without it.
- Wed Nov 18, 2020 9:01 pm
- Forum: Silencer Discussion
- Topic: Stubby form 1 build
- Replies: 4
- Views: 2942
Re: Stubby form 1 build
Generally, not clipping the first baffle reduces POI shift at the expense of increased sound. Given how few baffles you have, you might consider clipping it if you want a bit more sound reduction and just live with the shift.
- Sun Nov 15, 2020 9:53 pm
- Forum: AR15s
- Topic: 8.5” barrel buffer question
- Replies: 2
- Views: 3906
Re: 8.5” barrel buffer question
I run a suppressed 8.5" upper and a 3oz buffer and mil spec spring have worked for me in the past. I currently run and prefer the Spikes T2 buffer (with mill spec spring). I have tried stronger springs, but reliability with sub sonic was not perfect. With my current setup I have shot 300+ subso...
- Sun Nov 15, 2020 1:54 pm
- Forum: Handloading
- Topic: ...
- Replies: 34
- Views: 6827
Re: What should I load based on this data?
My home defense load with Barnes 110 & lil'gun is 20gr. I bias towards power for this load with adequate accuracy. If I can make a head shot at 7yd and chest shot at 50yd, I'm happy. My plinking/training load for for 125TNT & H110 is 18gr. This gives adequate performance for those tasks whi...