300BlkTalk

Neat. I still want to get the stock removal tools, but I enjoy seeing this tech mature and become more end user friendly.

Check:
1) Ejector
2) Extractor
3)gas rings
4) That you have an H2 or heavier buffer.
5) figure out whether you have a standard weight buffer spring.

you can increase the load up to the max range.

Or switch to a gassier / faster powder.

The fact that your gun cycled commercial loads proves it is possible.Nothing magic happens in factories that you can't replicate and probably exceed.

Me too. It was happening a couple months back IIRC too, but then straightened out.

Every time I try to post, it makes me repeat the login, which loops. No guarantee of an actual post. I have taken to ctrl+A then CTRL+C before I hit submit.

That is appealing. I sure wouldn't want to be placing orders until my F1 was cleared though.

I am not smart enough to figure out what that expression means.

Talking so much that his tongue is in open air for significant periods perhaps?

Referring there to 311041 PB. 172-185 grains depending on alloy...

I tried it in several.Faxxon M4, widened M4, PSA widened M4, and eventually DIY improved PSA. IIRC I tried it in a CMMG barrel too, which was ~M4. I found that there is a short length of ranges that feeds, and a long length which feeds. In the middle hangs up with most of them and the very short end...

But you were wise to keep the metal way off the sides of the shoot area. I would be mindful about where the RO stands in relation to the breacher, given pellet bounce angles.

A shoot box on the ground to force 45* shoot angle is wise too.

Source for those parts?