300BlkTalk

Your problems are two fold with this bullet! One you'll have to run them to fast for a PB Bullet to get them to work in an AR (Poor accuracy). Two they are probably too soft therefore don't feed well (catching on feed ramp). :twisted: The round nose cast lead bullets (130gn)I have tried feed fine i...

MosquitoArms wrote:Speer TNT 500 PACK at Powder Valley for 97.86

They also have Reloader 15, Reloader 19 and Reloader 22 in 1# cans

I would add that they have IMR4227 in 8 pounders as well.

Thanks guys, got some 296! Sadly I can't even finish my rifle, because I have to buy powder. Between this order and the 8lbs of Lil'Gun I just got, I'm broke! :lol: Got about 5 pounds coming my way.......shame you aren't closer to share that Lil'Gun :P But glad you got it as well.... I should be se...

http://www.bayoubullets.net

I got a box of .380 I am loading up now, no experience with others. They do suggest using cast lead loads, though.

Owned by one of the Miculek's (Donnie, a son I believe)(a brother I am told...lol).

I have never purchased a barrel with the barrel extension attached that was out of spec as far as headspace using a servicable bolt/carrier. I have never purchased a barrel without the barrel extension being already installed. Have ya'll experienced some out of spec barrels with extensions installed?

Obviously, your necks or your projectiles are out of spec. My money is on the neck. A measurement is all it takes to confirm.

If nothing else, use your resizing/depriming die remove the depriming stem and resize the case and check the fit.

Yep, it looks like you need a collet puller die and some time on your hands. I would check the length of the brass before you size it again and when you do resize it make sure your die is touching your shell plate. Some have reported that the shell plates have to be thinned a little to get a "f...

polizei1 wrote:What side of Columbus are you on? If we can meet somewhere I'll pick it up, but I'm in Cinci.

You had better get it polizei1....I was getting the mileage to Columbus down to prepare fir a roadtrip!!!

I bought some 308 150gr bullets. Listed as ACM flat point from a vender at a gun show. He recommended IMR 4227 and gave me the load data he uses. 15-15.1gr, 2.08 OAL for 1600 fps. With a don't pass 1700. He did not spec the primer. I have Winchester small rifle. I intend to use these to hunt the Wi...

Got the Magpul stock in today!!

Quick shipping and great communications!!

Thanks drayks!!