300BlkTalk

I just checked all 5 pmags. I have to tap pretty hard to get them to lock in. The metal 30 mag a friend borrowed me locks right in without any fuss. Will test again with the upper removed from the lower. Was doing a search on lancer mags and came across this: https://www.youtube.com/watch?v=9tktaCwT...

Try 178 gr Hornady ELD-X. Also try Varget. I have a Savage 10T and my reloads shots 3 in a dime @100 yards. My brother has the 10 FCP and any hornady bullet would not work for crap. He shot 175 FGMM and now is set. He puts 4 in almost the same hole @100 yards.

Its a Sota Arms 16 inch barreled upper. Here is what I purchased from KAK Industries: https://www.kakindustry.com/ar-15-parts/lower-parts/buffer-tubes-and-parts/carbine-buffer-tubes/kak-m4-stock here is the upper from sota arms: https://sotaarms.com/component/jshopping/product/view/2/254?Itemid=0 Wi...

When I was at the suppressor shop last weekend, i Looked at the K version. They had a chart showing db level on all sandman suppressors. The K was not rated safe db for hearing so I went with the S. Don't know anything about the Micro30.

rebel wrote:Lancer

Just looked at the price of Lancer. Not cheap.

Is there an english version of this for us morons who just shoot?

Don't have any carbon on barrel around the gas block. Even around the tube where it goes in is clean. Its clean. Just checked the metal mag in both 16 and 10 inch barreled. Pmag has to be slapped hard to lock in, the metal mag clicks and locks in perfect without having to slap it in. I hate those me...

Just cleaned. Ran compressed air down the tube. Everything seems good. Gas block is on nice and tight. This one has a gas port of 125 just like my 10 inch 300BO. Am now having issues getting the pmag to lock in place. A friend at the range game me a metal one to try so will give that a shot to see i...

In short words, I think you broke it. :mrgreen: Worked fine until it didn't after changing ammo. Then it wouldn't work with the original ammo. Gas system somehow got blocked or sprung a leak. Make sure the bolt isn't carboned up and sticking in the carrier and that the bolt catch is not slipping be...

Well, after emailing Dellet back and forth of an issue, got it pretty much fixed. Worked up some 125 SST with H110. Shot 110 V-Max to warm up the barrel. No issues. Then started on the 125's. Last round wouldn't lock bolt to the rear. Worked up some 150 gr bullets I have laying around for my 308 jus...