300BlkTalk

Dolomite_Supafly wrote:I don't have Quickload but if it is 300 Blackout related I might give a stab at pretending to be Quickload.

Next to Dellet, this is as close as you can get without buying Quickload.

16" Rem. 700 YHM ULT-30 Ti Hornady 190 Sub-x Avg. 1066 fps ES 32 SD 12 15" penetration in Clear Ballistics 10% gel @ 936 fps https://s20.postimg.cc/4xn12ozqx/MVIMG_20180218_134929.jpg 100 yd grouping ( factory loading) https://s20.postimg.cc/syaj7wo1l/target_image.jpg Expansion at 936 fps...

16" Rem. 700 YHM ULT-30 Ti Hornady 190 Sub-x Avg. 1066 fps ES 32 SD 12 15" penetration in Clear Ballistics 10% gel @ 936 fps https://s20.postimg.cc/4xn12ozqx/MVIMG_20180218_134929.jpg 100 yd grouping ( factory loading) https://s20.postimg.cc/syaj7wo1l/target_image.jpg Expansion at 936 fps ...

2manyToys wrote:I happen to like my SLR Sentry. You do have to cycle and lube the adjuster screw after use to keep it from freezing in place.

+1 on that.

Shpd_Retired wrote:I am using a Lyman case gauge and I would put a picture of it on here if I can figure out how.

viewtopic.php?f=143&t=97637

Try this. it walks you through the process of posting pictures.

https://suparms.com
I used one of these that worked well on supersonic loads. If you're LE or a vet, email them your DD-214 or LE credentials, and they'll give you a 20% discount.

workky wrote:

rebel wrote:

workky wrote:
That was me

Thanks, I'm old and have CRS.

Hahaha, I'm not sure what CRS is

Can't Remember Sh... I have the same problem

Boolit_Head wrote:I use a accushim

http://www.wheeldiamond.com/ar15accushim.htm

That looks like a better option.

Great piece, Dellet. Thanks for sharing.

No, it's not uncommon at all. A couple of things you can do is, drill and tap for a tension screw at the rear pin. Or, you can get some shims to eliminate the side to side play. I just got a set from Triggershims.com, and took care of the same issue in a recent build.