300BlkTalk

Another option is the Mike's Reloading Bench annealer. It's a little more than the Annealeez, but there's nothing extra to buy . I've owned both, and Think the MRB is well worth the extra. https://www.mikesreloadingbench.com/mrb2018_006.htm other than the torch. its not an expensive torch, but ya s...

have one, its one of their earlier generation machines - and it works great. get around 4k cases on a single 1lb tank of propane. pro tip #1 - dont lube the cases before you anneal. i had some that had been previously lubed with one shot that i went back to anneal (playing with the new toy and all t...

the TB will send those 150's nicely too.

dellet wrote: ↑Sat Feb 13, 2021 7:47 pm

Nothing wrong with the Hornady 9th, just print out the errata page and tuck it in.

i also mark the pages noted for the calibers i shoot with the corrections and a note to see the errata page tucked in the cover in case of questions.

hth

ultrasonic cleaner is the *only* way to clean them.

run 2x 8 min cycles on mine, with heat and basic US cleaning stuff (the bottle that HF sells) and i wipe the carbon off with a rag 90% of the time. sometimes it needs a quick touch with the scotch brite, but thats after a long suppressed session.

Interesting. Gunbroker has sellers with powder, though at profiteering prices, and they are shipping. I assume through a hazmat certified shipper. one would hope... but there's also a bunch of scabs on there shipping dirty too. thats why i posted my location...ftf only yea, i wasnt suggesting that ...

Plant, hope you're doing better!!! thanks vent at this point.. significantly better. still not completely out of the woods with the pneumonia yet - but pretty damn close at this point. they warned me it would take forever.. but its redonkulus. really fumey stuff (diesel, cologone/perfume, etc) stil...

just a reminder to save anyone from asking - powder and primers are not shippable due to their hazmat status. the fines for trying to sneak a shipment through and getting caught are in excess of $80k per violation. i know the OP didnt suggest it, but with as tough as stuff is to find, i figured i'd ...

I recently bought a 5 In barrel and want to install a free float tube. (similar to the hogue knurled forend tube). Also, I plan on installing a KAK flash can. However, the only tube I found is a 7 Inch forend tube. Will it work on a 5 Inch barrel with a 2.25" flash can? the flash can is probab...

Blog, I'll manscape you. Got the Stihl all sharpened up 20 inch bar, chipper chain, 13,500 rpm. Bring your nethers, I'll trim :twisted: Lol, this is like old times here; it’s been a bit dry lately! In that vein Blog Sarge I'll show the latest Manscaping attempts that Plant has sent me, asking me wo...