300BlkTalk

I was skeptical. I have used the suppressor on other guns with no fliers. And the fliers I was getting were random.

The alignment rod is touching the endcap. Also scraped some carbon off where the rod contacts and there is copper from Bullet contact. My 9mm suppressor on the same gun is perfectly centered with the rod. It looks like most of it is in the 5/8 direct thread mount. Alignment looks better with the 5/8...

I’ll try to get a rod that will work to check it. All ammo was supersonic 120-125 gr except one load that was supersonic 150gr.

Wouldn’t I be able to see evidence on the suppressor if there was contact? It is user serviceable so I have looked at every baffle and the end cap and saw no evidence of Bullet contact.

Can a suppressor cause fliers without a battle strike or any type of contact? I posted in the bolt action rifle section about MOA and sub MOA groups with some 8-12” fliers in the middle. I have no evidence of contact. Use the suppressor on 3 other guns without fliers. I have never read anything abou...

I have one in 6.5 creedmoor. It’s a nice rifle especially for the price. If they were the same price at a Ruger american, I would get the Ruger but for about $200 they are hard to beat. I can shoot MOA with mine. It seems to be getting a little better after it breaks in.

I removed material from the stock to free float the barrel already when it’s on the gun rest I can pinch the forend and barrel and feel it move until it stops so, it’s not touching under the weight of the gun. I did this on 2 other American rifles and my compass rifle. I also did a trigger job so it...

Hello, looking for input, I have the ranch rifle with AR mags and a griffin armament suppressor. I can shoot MOA or sub MOA at 100 yards with 3 different loads and just over MOA with another. But I also get major fliers that seem to be very low. I took my suppressor apart and I see no evidence of co...