Search found 31 matches

by fancygunz
Mon Dec 19, 2022 9:02 pm
Forum: Handloading
Topic: Advice on subs CFEBLK
Replies: 15
Views: 1660

Re: Advice on subs CFEBLK

I have been loading up some 300 blk with LC Brass and using some Sierra 168grain TMKs. I'm using CFEBLK powder. I know this bullet isn't "designed" for the 300BLK but I bought some a while back when bullets were scarce and think they should work. Also, at sub velocity levels I don't reall...
by fancygunz
Fri Feb 12, 2021 11:13 pm
Forum: Classified Ads
Topic: WTT or WTS 8lb jugs CFE BLK and SW Blackout
Replies: 0
Views: 3235

WTT or WTS 8lb jugs CFE BLK and SW Blackout

I have 8lb jugs of CFE BLK and Shooter's World Blackout that I would prefer to trade for CFE pistol, CFE 223, Varget, N150, or N320.

Also looking for 110gr Barnes black tip.

Location MA or RI, face to face only, send me a PM.
by fancygunz
Wed Feb 03, 2021 8:54 am
Forum: Handloading
Topic: 110gr Barnes TAC-TX and CFE BLK Load Development
Replies: 10
Views: 7402

Re: 110gr Barnes TAC-TX and CFE BLK Load Development

Good comments, everyone, I am planning on reloading this week with CFE BLK and Barnes 110 Gr TAC-TX. Already tried 22.5 g (c) and shot well. I noticed on the Hornady Reloading site there is a reference for this combination with a Max Load at 35,900 psi using same grain V-MAX. So getting the seating...
by fancygunz
Wed Feb 03, 2021 8:40 am
Forum: New Product Announcements and Good Deals
Topic: Innovative New 300 Blackout Ammunition From Sig Sauer
Replies: 12
Views: 26998

Re: Innovative New 300 Blackout Ammunition From Sig Sauer

Has anyone fired these yet?

I have some pulled bullets coming in and will be testing them, I can post results. Don't want to duplicate it if there's already a thread going on these bullets.
by fancygunz
Wed Nov 25, 2020 8:53 am
Forum: Handloading
Topic: 300 Blackout bullets
Replies: 3
Views: 1735

Re: 300 Blackout bullets

Is the .308 federal 130 grain otm bullet a good choice for the 300 blackout. If so, where could I find good load data? I am brand new to the forum. Thanks in advance. Will be shooting them out of a new pistol build. Spikes tactical upper and lower, Ballistic Advantage 10.3" Hanson barrel, and ...
by fancygunz
Tue Apr 28, 2020 4:03 pm
Forum: Main Discussion Area
Topic: Zero Problem
Replies: 3
Views: 1427

Re: Zero Problem

Questions: 1. Is it the ammo? 2. Is it the barrel/pistol not liking the ammo? 3. Does gas system need tuning? Your kind help would be appreciated. Thank you. 1. Yes, most likely 2. Depends, how big were your groups with each load? If one grouped better than the other I would say there was a relatio...
by fancygunz
Tue Apr 28, 2020 3:15 pm
Forum: Handloading
Topic: Accuracy Woes
Replies: 12
Views: 3111

Re: Accuracy Woes

..., how far off from the nearest bad load are they? ... How bad can bad get? It can get pretty darn bad. In my 8.3" BA I mostly found OAL critical to reliability. Note also the loads I gave you will run fine in a GI mag. Pretty near every bullet that's fed out of a magazine needs to "jum...
by fancygunz
Fri Apr 24, 2020 7:42 pm
Forum: Handloading
Topic: 168 grain speer gold dot
Replies: 6
Views: 1550

Re: 168 grain speer gold dot

I think Speer said it won't work due to the velocity required for expansion being too high. They make a specific 300 blackout version of the 150 grain that expands at lower velocities. If you don't care about expansion the 168 should shoot OK. Sorry, I don't have specific load data for you, I just w...
by fancygunz
Fri Apr 24, 2020 10:30 am
Forum: Handloading
Topic: Accuracy Woes
Replies: 12
Views: 3111

Re: Accuracy Woes

Try a different optic and take that out of the equation. Worth a try. 2 barrels, same problem so it is probably another issue. I second Rebel’s suggestion. Try another optic on this rifle and maybe also try the PA 1-6 on a known-to-be-sub-MOA rifle. Also, is your one-piece mount attached entirely t...
by fancygunz
Thu Apr 23, 2020 2:27 pm
Forum: Handloading
Topic: Accuracy Woes
Replies: 12
Views: 3111

Accuracy Woes

Hello All, This rifle has been giving me issues since day 1. The current issue is that I cannot, no matter what I have tried, get below 2 MOA (1 inch at 50 yards) on this rifle. I don't know what else to try at this point, but I find it very difficult to believe there is not something very wrong wit...