Search found 35 matches
- Sun Dec 17, 2017 1:36 pm
- Forum: Main Discussion Area
- Topic: LWRC Ultra Compact Stock issue
- Replies: 0
- Views: 1047
LWRC Ultra Compact Stock issue
Anyone running into issues with the LWRC ultra compact stock setup? I'm running one with a Noveske 8.5 inch barrel. The buffer comes stock at 3.2oz and it would not cycle subs. I dropped the weight of the buffer to 3oz and it cycles fine for supers (125gr) but not for subs (203gr). It ejects the sub...
- Tue May 10, 2016 2:35 pm
- Forum: Handloading
- Topic: Any reason not to get Little Crow Gunworks World's Finest Trimmer?
- Replies: 12
- Views: 4684
Re: Any reason not to get Little Crow Gunworks World's Finest Trimmer?
I've used both the WFT and EZ Trim-it to trim 300 BO, 223 and 308. Both work great and both are time consuming. I used a cordless drill clamped on my vice, running continuously and it worked great. I now run a Bosch trimmer with Titan adapter on my 650 to do all my trimming. The WFT and EZ Trim-it a...
- Mon May 09, 2016 6:23 pm
- Forum: Silencer Discussion
- Topic: Silencerco To The Rescue
- Replies: 17
- Views: 6557
Re: Silencerco To The Rescue
Silencerco suggest loosening the can about a quarter turn after latching it in. This should prevent it from sticking on the saker mounts.
- Tue Apr 26, 2016 8:32 pm
- Forum: Main Discussion Area
- Topic: Silencerco SPEQ program....
- Replies: 7
- Views: 2193
Re: Silencerco SPEQ program....
The prices under the SPEQ program are nothing drastic for me to rush and buy a can. My dealer's prices are cheaper than SPEQ.
- Sat Apr 16, 2016 2:49 pm
- Forum: Handloading
- Topic: Converting brass
- Replies: 3
- Views: 1416
Re: Converting brass
Yes, using the end mill bit I haven't had to chamfer or deburr. It works great. I can't compare it to the dillon 1500 but it would be easier to replace the router for around $150 than buying another 1500. I doubt I will ever have to replace the router and I'm sure Dillon makes a great product. It co...
- Fri Apr 15, 2016 11:32 am
- Forum: Handloading
- Topic: Converting brass
- Replies: 3
- Views: 1416
Re: Converting brass
I have the titan adapter. using the bosch router.
- Tue Mar 08, 2016 10:03 pm
- Forum: Handloading
- Topic: 203gr 4227 subsonic
- Replies: 8
- Views: 1463
Re: 203gr 4227 subsonic
Doesn't matter what gas length you have. I have a Noveske 8.5 inch barrel and using the 203GR palmetto with 10.2GR of 4227, the bolt doesn't lock back on last round. Have not used my chrono yet. Will do some more load development or change to a lighter buffer. Currently using spikes st2 buffer and o...
- Sat Feb 27, 2016 10:14 am
- Forum: Handloading
- Topic: Annealeez Review
- Replies: 14
- Views: 6259
Re: Annealeez Review
i ran a bunch of blackout through it today. i did not expierence any bridging at all with blackout. It was a bit trickier than the 308 to get the torch adjusted, but not rediculus. as a check i weigh'ed up the canister i was using saturday to see if i could approximate how much gas was left. a full...
- Mon Feb 22, 2016 10:24 pm
- Forum: General Gun Talk
- Topic: Frog Lube = Sticky, Tacky Mess!
- Replies: 41
- Views: 9797
Re: Frog Lube = Sticky, Tacky Mess!
Frog Lube in my opinion is garbage. CLP has never failed me.
- Tue Feb 02, 2016 3:14 pm
- Forum: Handloading
- Topic: Annealeez - any hands on experience?
- Replies: 23
- Views: 4572
Re: Annealeez - any hands on experience?
I'll be looking forward to reading your review. I am considering purchasing this product.plant.one wrote:got my shipping notification today.
6 days days from my order confirmation. not too shabby.
should be able to give a product review this weekend.