Search found 322 matches

by ThreeHundredBlackout
Fri Feb 14, 2020 11:43 pm
Forum: Main Discussion Area
Topic: New guy here, have a question
Replies: 7
Views: 313

Re: New guy here, have a question

I am the cheapskate here, I used the Lee dies. they work fine. I have even formed brass with them with no problems. Hey man, don't feel bad, my first 300 Blk dies were lee also and they worked great for me, and formed brass with them too without trouble ( had to readjust depth one time then all was...
by ThreeHundredBlackout
Fri Feb 14, 2020 12:39 am
Forum: Main Discussion Area
Topic: New guy here, have a question
Replies: 7
Views: 313

Re: New guy here, have a question

I also use the Hornady custom grade. Was about to order when I saw them in stock at Academy for couple dollars less than midway. Good so far with great neck tension on the brass. Just be careful with the crimp feature. I messed up a few brass before I figured it out. Not the fault of the dies, my i...
by ThreeHundredBlackout
Sat Feb 01, 2020 6:45 pm
Forum: AR15s
Topic: New 20 rd Pmags vs old 20 rd Pmag
Replies: 2
Views: 318

Re: New 20 rd Pmags vs old 20 rd Pmag

I only have gen 3 pmags and have not had to alter them, never had any problems yet to date, but just to be safe i have some blk out pmags for subs and some lancer l5 and l5 300 blk, but back on topic....i run everything through my g3 20s and no problems and mainly use the g3 30s for supers. If i hav...
by ThreeHundredBlackout
Tue Jan 21, 2020 5:54 pm
Forum: Handloading
Topic: 2300 ft/sec from 10.5” barrel with 110 grain bullets
Replies: 17
Views: 656

Re: 2300 ft/sec from 10.5” barrel with 110 grain bullets

With the 110 tac-tx I've seen 2,270 fps in an 8" , average was 2250 fps. But i also saw loads of pressure signs at 20.8 maybe 21 gr H110 and it was destroying my brand new hornady brass on the first shot, so i backed off and stayed around 20.4 ish for a hunt load i smoked a white tail buck with in ...
by ThreeHundredBlackout
Tue Jan 21, 2020 5:11 pm
Forum: Handloading
Topic: 2300 ft/sec from 10.5” barrel with 110 grain bullets
Replies: 17
Views: 656

Re: 2300 ft/sec from 10.5” barrel with 110 grain bullets

With the 110 tac-tx I've seen 2,270 fps in an 8" , average was 2250 fps. But i also saw loads of pressure signs at 21 gr H110 and it was destroying my brand new hornady brass on the first shot, so i backed off and stayed (edit) at 20.8 gr for a hunt load i smoked a white tail buck with in WY at 115 ...
by ThreeHundredBlackout
Fri Jan 17, 2020 11:56 pm
Forum: Handloading
Topic: Looking for a better 300 BO ammo box
Replies: 4
Views: 480

Re: Looking for a better 300 BO ammo box

+3 on the MTM 50 and 100 rd boxes ! Plus they have hinges that won't break to boot ! I have some in green, some in translucent blue, and some with the bottom black and the top translucent zombie green. I like the MTM ammo can carrier that comes with 4 plastic ammo cans too, for organizing different ...
by ThreeHundredBlackout
Sun Jan 05, 2020 2:04 am
Forum: Handloading
Topic: Ring around bullet when using hornady bullet seating die
Replies: 75
Views: 2401

Re: Ring around bullet when using hornady bullet seating die

Just out of curiosity.... Take a look in your hornady die box for me and in the top right corner there should be a tiny boxed off rectangle with a black piece of foam in it, under that piece of foam there should have been a second seating stem that is different than the one installed when you bought...
by ThreeHundredBlackout
Sun Jan 05, 2020 1:27 am
Forum: Handloading
Topic: Ring around bullet when using hornady bullet seating die
Replies: 75
Views: 2401

Re: Ring around bullet when using hornady bullet seating die

Not tied to these dies. Going to try RCBS dies. Edit: Picked up a forster ultra micrometer seating die! If you polish the hornady expander like dellet said and have the die set correctly it will work well and cost less than buying the new dies you have now. I also have a set of hornady dies and aft...
by ThreeHundredBlackout
Sun Dec 15, 2019 4:33 pm
Forum: Handloading
Topic: Barnes 110 Tac TX bullets
Replies: 12
Views: 788

Re: Barnes 110 Tac TX bullets

Edit : Sorry that was the tac x i had seen on grafs

But they have the 120 i saw in the tac-tx

Thats a bummer, i guess the secret got out about how awesome the 110 gr bullet is........
by ThreeHundredBlackout
Thu Nov 14, 2019 3:05 pm
Forum: General Gun Talk
Topic: I may have an addiction other than 300blk and Black Rifle Disease.
Replies: 11
Views: 1665

Re: I may have an addiction other than 300blk and Black Rifle Disease.

Yeah, Glock needs to get a mans hand to make the right grip instead of the asian woman they must have their current grip based on.......and do a nice trigger gaurd undercut from the factory and make the trigger gaurd not so ugly, i dont think its functional for much how its designed now so they migh...