300BlkTalk

Recently shot a new ladder load of these in my 8.1" barrel rifle. Distance was 100yd, same rifle and condition previously listed in this thread. Bullet: Outlaw State 155gr Low velocity Powder: Lil Gun Charge: 19.5gr Case: PNW (fired) Primer: CCI 450 COAL: 2.222 Avg MV (fps): 1947.33 Min: 1923 M...

What's the latest info on these? Is the BC of .400 still correct? Which model is that? G1? G7? Why did you choose to use a rebated tail vs a regular boat tail? Also, it appears these bullets for the most part weigh in at around 156.2-156.4gr, with a few that come in around 155.2gr. Not sure if this ...

I was originally gonna go for a SpecWar 762, but I'm very happy with the Omega. Mine is on an 8.1" barrel. Supers are a bit louder than an unsuppressed .22LR, while subs are noticeably quieter than a unsuppressed .22LR (I did a side by side shoot to check). Subs you pretty much just hear a slig...

CQBSS

HoloSun HS503C


I like this set up a lot, and I prefer circle/dot > red dot > iron sights

FWIW I've used a Trijicon RMR on top of my ELCAN SpecterDR (piggyback mounted) as well as 45 degree offset. I feel like the 45 degree offset is much more natural. Piggybacking in red dot was hard to use, and in the case of some optics (like my ELCAN with it's external adjustments) easier to throw of...

PLATFORM: Spikes Tactical Compressor (300blk) "modified" (8.1" 1:8 RH barrel) SilencerCo Omega 7.62 suppressor (direct thread mounted) Leupold CQBSS 1.1-8X M-TMR HiperFire 24C trigger AMMUNITION: PNW 125gr Match (Supersonic) PNW 155gr Match (Supersonic) RANGE: Northern Virginia, Late...

elitejake, what was your recipe for the 145gr from lehigh defense? I just got a box and can't find much info thus far.

http://i1085.photobucket.com/albums/j426/foxhoundmarine/screen2.jpg http://i1085.photobucket.com/albums/j426/foxhoundmarine/screen1.jpg http://i1085.photobucket.com/albums/j426/foxhoundmarine/screen3.png I think this is settled. The Omega 7.62 appears to be good down to 8" with 300blk, but sub...

E-mail exchange last night from Jacob Stam, Customer service manager at SilencerCo regarding barrel length ratings for 300blk ME - "Hello, I recently purchased one of your Omega 7.62 suppressors through Silencershop.com and came across some unsettling info. My intent is to use it on my 300blk S...