300BlkTalk

Can you clarify what "as sighted" means? Are you saying that you are sighted in with supers, but subs hit 6 feet higher? At what range?

https://scontent-dfw5-2.xx.fbcdn.net/v/t1.0-9/72284769_10217852904428026_7956879798666526720_n.jpg?_nc_cat=106&_nc_ohc=YrmO6jd8EXAAQlPf2NKENQrd2b7W21zpuc_vwMxQorAdAqjXQmit_VIJA&_nc_ht=scontent-dfw5-2.xx&oh=eced0faf8a51fda966332fa35661a6d6&oe=5E7440F3 https://scontent-dfw5-2.xx.fbcdn.net/v/t1.0-9/76...

Are you saying there are places where you can pay someone to process the deer you killed? What has this world come to?

Most likely the suppressor is either loose or misaligned. If you're sure the mount is tight, get an alignment rod to check alignment. Radical isn't exactly top shelf...wouldn't be a shock if you needed a new barrel.

About 2250....Temp around 60 deg. Don't know how much velocity you lose below 20 deg. They have an impressive fireball in low light.....lol Rebel sent you a pm Nice. I just started testing SOCOM powder. Don't believe I could quite match your velocity without seeing pressure signs, but so far 3 roun...

Rebel believe it was you that had written that 1680 worked well with GDs way back. Thats an understatement to say the least.... :lol: You rarely see consistently low ES/SD's as this combo outside the ppc/br class cartridges. You're certainly shooting them well. That's impressive. What's your veloci...

The bad news is that you likely have an ammo problem, possibly a thick neck not allowing it to chamber until you hammer it in all the way. The good news is that your rifle is working the way it should, keeping you from blowing your face off. I think we'll just that sink in for a minute or two. You'...

Break out your cutoff saw, annealer, and neck trimmer. 308 brass is cheap.

1. Don't screw it up.
2. Have fun!

That should just about cover it.

Seriously, tell us a bit about how you plan to use it (sub? super? suppressed? hunting? target? etc.) and people should have some suggestions. Also, what's your budget, including optics?

I have found more consistent results with H110/W296 using magnum primers. With subs, no. Haven't tried CFE BLK.