Search found 52 matches
- Mon Jan 30, 2017 10:58 pm
- Forum: Casting
- Topic: NOE 227 grain HP feeding problems
- Replies: 2
- Views: 1671
Re: NOE 227 grain HP feeding problems
it hangs on the feed lip, it dosen't seem to lift up. they're actually short at the moment at 2.000" that was the only way i could make them feed from the factory magazine.
- Mon Jan 30, 2017 9:31 pm
- Forum: Casting
- Topic: NOE 227 grain HP feeding problems
- Replies: 2
- Views: 1671
NOE 227 grain HP feeding problems
I am shooting the NOE 227/247 grain bullet out of a rem 700 bolt gun. I have tried the standard bottom metal double stack six round magazine and a AICS single stack 10 round magazine. The single stack work much better but I'm having to quickly slam/push the bolt home to get the bullets to feed. I do...
- Mon Jan 30, 2017 9:30 pm
- Forum: Bolt Actions
- Topic: 227 NOE hollow point feeding rem 700
- Replies: 1
- Views: 1496
227 NOE hollow point feeding rem 700
I am shooting the NOE 227/247 grain bullet out of a rem 700 bolt gun. I have tried the standard bottom metal double stack six round magazine and a AICS single stack 10 round magazine. The single stack work much better but I'm having to quickly slam/push the bolt home to get the bullets to feed. I do...
- Mon Jan 23, 2017 8:04 pm
- Forum: Bolt Actions
- Topic: Rem 700 Bottom Metal
- Replies: 5
- Views: 3100
Rem 700 Bottom Metal
Good day gents. I have a remmy 700 w/ timney stright trigger in a HS precision stock currently. I've always wanted the bottom metal deal but i've never done anything with it mainly due to the fact of cost and not really needing it. Recently I've taken up casting the NOE 227/247 grain hollow point an...
- Mon Jan 23, 2017 3:25 pm
- Forum: Bolt Actions
- Topic: AICS mags for Magpul 700 Hunter stock with Magpul bottom metal....
- Replies: 8
- Views: 10428
Re: AICS mags for Magpul 700 Hunter stock with Magpul bottom metal....
A long title for a possibly short question and answer..... I installed a Magpul Hunter 700 stock on my Remington 700 300blackout. I am interested in the Magpul bottom metal and 10 round mags, but, have read good and bad about the aics type mags. Does anyone have experience with this setup and can y...
- Wed Aug 24, 2016 8:04 pm
- Forum: Handloading
- Topic: To short? Brass Creation
- Replies: 10
- Views: 2050
Re: To short? Brass Creation
Every one of my converted LC cases are short and actually cut on an angle. I just use them to play with subs, they even crimp crooked, but they shoot fine. And nope, they pretty much never stretch. My supers grow pretty significantly. never really checked subs... how short are you talking.. i'm pre...
- Wed Aug 24, 2016 7:20 pm
- Forum: Handloading
- Topic: To short? Brass Creation
- Replies: 10
- Views: 2050
To short? Brass Creation
While in the process of converting my first batch of brass (5k) of blanks. My Jig came loose and before i realized it i had made quite a few cuts. I got it back to the correct size and figured they would stretch out to correct length.. well.. They didn't. So i've got quite a few casings down at arou...
- Wed Aug 24, 2016 7:18 pm
- Forum: Handloading
- Topic: To short? Brass Creation
- Replies: 0
- Views: 592
To short? Brass Creation
While in the process of converting my first batch of brass (5k) of blanks. My Jig came loose and before i realized it i had made quite a few cuts. I got it back to the correct size and figured they would stretch out to correct length.. well.. They didn't. So i've got quite a few casings down at arou...
- Wed Aug 24, 2016 7:18 pm
- Forum: Handloading
- Topic: To short? Brass Creation
- Replies: 0
- Views: 495
To short? Brass Creation
While in the process of converting my first batch of brass (5k) of blanks. My Jig came loose and before i realized it i had made quite a few cuts. I got it back to the correct size and figured they would stretch out to correct length.. well.. They didn't. So i've got quite a few casings down at arou...
- Wed Aug 24, 2016 7:18 pm
- Forum: Handloading
- Topic: To short? Brass Creation
- Replies: 0
- Views: 519
To short? Brass Creation
While in the process of converting my first batch of brass (5k) of blanks. My Jig came loose and before i realized it i had made quite a few cuts. I got it back to the correct size and figured they would stretch out to correct length.. well.. They didn't. So i've got quite a few casings down at arou...