300BlkTalk

The only rounds that I sometime get a hang up with in the AICS mags is the really short 125gr soft points I load. The 125gr Nosler ballistic tips and 208gr Hornady Amax I load feed like a champ.

neovader wrote:PSD any good?

I'm pretty sure PSD is just a military version of PMC. It's great brass for reloading 223, I haven't tried to convert it to 300BLK yet.

You do get a flash hole off center here and there, but not too bad and I still use those too and can't tell the difference in my plinking loads.

You can also mix anhydrous lanolin and caster oil (50/50) over heat and then pour into small containers and let it cool before use.

This mix is all I use now for resizing, cartridge converting and swaging. Just a dab will go a long way.

Here is a short clip of a squib I had in my 300Blackout bolt action. Two reports, the first being the ignition and the second is the muzzle blast. This wasn't a primer only squib, but a low charge squib. I was working on some 125gr sub loads and the difference between 4.5gr and 4.1gr was a world of ...

Wow! What are you firing these in? Isn't the published Max load with Lil gun around 17.5gr with a standard primer...and you are pushing theses well over that with a magnum primer? I wonder what chamber pressures are peaking at... What kind of accuracy are you getting with these? Interested mind want...

it's the Gobernment! ...I doubt they care how much( if any) the decibels are decreased...it's all in the construction. Any sort of chamber or baffles housed withing a hollow tube( or even a hollow tube with an end cap) will probably be considered a sound suppressor/silencer. compensators only direct...

Usually with 223/5.56 range pickups I'll find split necks before I find loose primer pockets....which is no biggie when converting to 300Blackout as long as you anneal them.

Not a picture of a gun...but the end result I guess. I was shooting 208gr subs at my steel pistol reaction target. I found this in between the target and firing line. It was preserved so well and it just amazed me how that AMAX petaled out so nicely. http://i71.servimg.com/u/f71/15/84/12/53/dsc00310...

Try the loads listed in Hodgdons online data. I think it list 9gr max with Lil Gun.

http://data.hodgdon.com/main_menu.asp

MDT shipped out my AICS mags today, so they should have them in stock now.