300BlkTalk

Thanks guys I'll pass this on to Donnie. BTW what's NOE? LoL! EDIT: Nevermind found it! Now this looks interesting . . http://noebulletmolds.com/orders/catalog/product_info.php?products_id=283 http://noebulletmolds.com/orders/catalog/images/N.O.E._Bullet_Moulds_311_198Gr._SP.Jpg 198 grain spire point.

Greetings I'm the new guy. Ive read through everything I could find that would pertain. I cant find where you shoot the life out of .223 brass and then transform it into 300 Blackout. Is this problematic? Intent is to not hack up a good brass supply for the sole purpose of the 300 blackout. I'm use...

Check this out: viewtopic.php?f=141&t=81664

I read in the forums that some 300 Blackout shooters/reloaders are looking for cast bullets wherein they could seat the lube rings into the neck. Bayou Bullets have a special lube coating that is virtually smokeless and does not require lube thus no lube groove. I sent a letter to Donnie at http://w...

Nevermind . . .

Ah Cr@p put this in ammo and probably should have put it in reloading, sorry.

Here's what I've done . . . Rifle: 16" CMMG 1/8 WASP brand new Bullet: Nosler 125 Gr. BT Powder: A1680 Brass: various but I weighed them +/- 2 grains Primer: unknown came with brass I had two that didn't seat right so I redid them and when I shot I had two flyers. So I'm thinking I'll redo this...

According to the accurate chart I could possibly load up too 21.6 with a 150gr fmjbt. If I'm reading the chart correctly that was posted above, the load I put together is close to max. Is that correct? Shot two Sierra 155 gr Palma Match BTHP today with 19.5 grains A1680 and both blew the primers cl...

Lee makes a 300 blackout fcd. Also pull ur seating die and check for any build up. I have the same dies and never seen it. Also check the tension of the neck. It seams u may not have enough. I haven't crimped my loads last few boxes ive loaded and shoots great. No pushing back into the case eaither...

Found it but it's the same chart your going off, sorry I couldn't help.

http://www.accuratepowder.com/wp-conten ... t_Data.pdf


Might try calling CMMG they load 147 gr., but I don't know if thet'll share their recipe.

Lee makes a 300 blackout fcd. Also pull ur seating die and check for any build up. I have the same dies and never seen it. Also check the tension of the neck. It seams u may not have enough. I haven't crimped my loads last few boxes ive loaded and shoots great. No pushing back into the case eaither...