Search found 10 matches
- Sun Jan 31, 2016 1:43 pm
- Forum: Classified Ads
- Topic: WTS/WTT Remington Model 7 AAC 300blk **SOLD**
- Replies: 1
- Views: 1016
Re: WTS/WTT Remington Model 7 AAC 300blk
Price drop- $600 shipped.
- Mon Jan 25, 2016 2:15 pm
- Forum: Classified Ads
- Topic: WTS/WTT Remington Model 7 AAC 300blk **SOLD**
- Replies: 1
- Views: 1016
WTS/WTT Remington Model 7 AAC 300blk **SOLD**
I bought this gun to add a bolt .300blk to my collection. I took it out once, and I don't like the stock at all! It's too small and too light for me. I'm estimating 30 rounds fired, +- 10. I installed a AAC 51T Brakeout, and that's included. Still have the original box, can't find the thread protect...
- Tue Jul 23, 2013 8:18 pm
- Forum: Silencer Discussion
- Topic: help me pick a 30 cal can
- Replies: 38
- Views: 8230
Re: help me pick a 30 cal can
2nd that! AAC SDN-6. 3rd. There are many people that have done tests about QD vs thread on for accuracy and generally they find no difference. I, like many, prefer QD for consistent indexing, almost no chance of it loosening, and using it on multiple hosts. I actually prefer the YHM QD system, but ...
- Thu Nov 15, 2012 1:59 pm
- Forum: Handloading
- Topic: New to 300 blackout. Good plinking bullets?
- Replies: 19
- Views: 16052
Re: New to 300 blackout. Good plinking bullets?
What about these? http://wideners.com/itemdetail.cfm?item_id=7239&dir=278|281|1081|1161 May-be ya got somethin' ther............................................that's about 15 centsa each. Might try them for plinking/working up a load. Bill Already out of stock :( I got a couple thousand of the...
- Sat Sep 29, 2012 10:58 am
- Forum: Handloading
- Topic: using pulled 7.62x39?
- Replies: 79
- Views: 24656
Re: using pulled 7.62x39?
Where are you all getting these? Wideners doesn't have the heavier ones, and the prices aren't that great.
- Sat Mar 24, 2012 11:45 am
- Forum: Handloading
- Topic: Working on Loading the Barnes 130gr TTSX BT bullet
- Replies: 19
- Views: 13842
Re: Working on Loading the Barnes 130gr TTSX BT bullet
My most accurate load with the 130ttsx is 18.2 gr of H110, CCI 400 primer, mixed LC brass converted, 2.150 COAL. I finally ran five rounds through my friend's chrono, avg for this load was 2110 out of a Noveske 12". Barely noticeable cratering, had to compare to other fired brass to notice. I a...
- Sat Mar 24, 2012 11:29 am
- Forum: Handloading
- Topic: M80 147 grn starting point?
- Replies: 80
- Views: 42999
Re: M80 147 grn starting point?
I bought some bulk 147gr fmj, and loaded them over 17.0 grains H110. Mixed LC brass converted, CCI 400 primers. 2.125 COAL. Functioned in both my 8" and 12", avg 1833 fps out of the 8" and 1940 fps out of the 12". I'm contemplating increasing the charge to 17.3 gr, but this load ...
- Mon Mar 05, 2012 9:26 pm
- Forum: Handloading
- Topic: Sierra 125 gr OTM
- Replies: 37
- Views: 11804
Re: Sierra 125 gr OTM
Let us know what kind of accuracy you get.. I was pretty disappointed in the accuracy of a few different loads I tried with this bullet. I even have about 150 left that I wasn't motivated to load.
- Thu Dec 22, 2011 9:31 pm
- Forum: Handloading
- Topic: Sierra 125gr OTM bullets
- Replies: 27
- Views: 10930
Re: Sierra 125gr OTM bullets
Here is my load recipe. Bullet = Sierra 125 grain OTM Powder = H110 - 18.4 grains (max load for me- some primers flattened) Primer = CCI #400 Case = 5.56 LC 09 (300 blk specs once fired from Brad's warehouse) OAL = 2.245 (mag length) Light crimp (Lee FCD) As always start 10-15% low and work up to t...
- Thu Dec 22, 2011 9:21 pm
- Forum: Handloading
- Topic: Are 300 Whisper & 300BLK brass the same?
- Replies: 21
- Views: 5133
Re: Are 300 Whisper & 300BLK brass the same?
Re: All Weather Arms brass-- This thread had me scared- I just received 2500 pieces of brass from them/him last week, but mine looks good. I measured several pieces agains some AAC/Remington primed brass I bought, and it's good to go. I checked several more handfuls of brass for the rough cuts you p...