Search found 130 matches
- Fri Feb 05, 2021 9:35 pm
- Forum: Handloading
- Topic: Subsonic Load Development
- Replies: 14
- Views: 10758
Re: Subsonic Load Development
There is no N105 data for 180gr + subs in Hornady 9th, Lymans 50th, VV 2019 manual, or VV website.
- Thu Jan 07, 2021 8:49 pm
- Forum: Main Discussion Area
- Topic: 1/5 Twist and Supers
- Replies: 15
- Views: 13687
Re: 1/5 Twist and Supers
Anecdotal evidence, but my 7 inch Q barrel groups 125gr TNTs loaded with N110 for accuracy as good as my 9 and 10.5 inch, 1/7 barrels out to 200 yards. The Q barrel groups long, heavy subs slightly better than the other barrels. I've shot three different Q barrels with similar results. That being sa...
- Sun Nov 29, 2020 6:54 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
Re: 11 inch barrel and carbine gas
Ok, there's good news and, based upon how one feels, bad news getting subs to work in my barrel. Good news: I found a couple different combinations of powder weights and seating depths of subsonic loads using N120 that will consistently BHO on the last shot. Bad news: they only work with the 762SDN-...
- Mon Nov 23, 2020 12:20 pm
- Forum: Classified Ads
- Topic: Factory new Remington primed 300 BLK brass.
- Replies: 5
- Views: 3026
Re: Factory new Remington primed 300 BLK brass.
Has anyone picked up a case of these?
- Sat Nov 21, 2020 8:26 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
Re: 11 inch barrel and carbine gas
Very acceptable results. I started by moving CBTO out .100 and worked back in .025 increments with the same 17gr charge of N110. From .075 to .100 out, I had BHO on every shot unsuppressed. No warning signs of pressure. At .050 increase and less, I ran into inconsistent BHO issues with Magpul 300blk...
- Sat Nov 21, 2020 4:07 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
Re: 11 inch barrel and carbine gas
I loaded up 4 strings of ten rounds at increased CBTO/lower case capacity with the Speer 125 TNT and N110. I am encouraged for sure. Off to the indoor range in about an hour. The getting the 125 SMK to work with my current charge of N110 will make me explore the importance of case capacity/construct...
- Fri Nov 20, 2020 9:40 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
Re: 11 inch barrel and carbine gas
As always Dellet, thanks for the perspective. And yes, at this point I feel opening the port is the easy way out. I'd like to try some load development first as I'm *this* close to making it work as is.
- Thu Nov 19, 2020 8:32 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
Re: 11 inch barrel and carbine gas
Hmmmm. I've been seating the subs so that they are sitting right on the N120. With the N120, are you suggesting moving the base of the bullet away from the powder?
- Thu Nov 19, 2020 6:38 pm
- Forum: AR15s
- Topic: 11 inch barrel and carbine gas
- Replies: 10
- Views: 3966
11 inch barrel and carbine gas
So, this is an idea I hatched back during lockdown in April. I own a 7, 9, and 12 inch barreled uppers with pistol gas in 300BLK. I wanted to try carbine length gas on a shorter barrel just to see if I could make it work for a rifle that would always wear a silencer. I pestered dellet in a couple PM...
- Tue Jun 09, 2020 2:57 pm
- Forum: Classified Ads
- Topic: WTS 300BLK Upper
- Replies: 1
- Views: 1146
Re: WTS 300BLK Upper
Sold