Search found 390 matches

by 45r
Fri Feb 19, 2021 11:28 am
Forum: Main Discussion Area
Topic: IWI X95 300BLK
Replies: 4
Views: 2479

Re: IWI X95 300BLK

If I could afford the x95 I'd be on it. No telling how long they will be available. With a can they might run on the super setting. I would shoot only subs suppressed through it anyway if I had one. If I had to set the gas to subs it wouldn't bother me. Probably run a quick release rds or lpvo. They...
by 45r
Thu Sep 24, 2020 11:40 am
Forum: Bolt Actions
Topic: Anyone shooting subs in Bolt action?
Replies: 16
Views: 12911

Re: Anyone shooting subs in Bolt action?

I load noe powder coated 230 hp's over 6.9 grains viht n-105 in my rem bolt gun witha chassis.
Very quiet and accurate.
1.5 inch groups at 100 yards.
by 45r
Mon Jun 15, 2020 10:35 am
Forum: Main Discussion Area
Topic: New to 300blackout world
Replies: 11
Views: 3572

Re: New to 300blackout world

Agb isn't needed with carbine gas 16 inch barrel. For building a pistol or rifle find a hand lapped barrel if best accuracy is wanted. My seekins 10.5 inch is very accurate,especially the second one. I have a 16 inch made by Montana rifle works from DCA before they went out of business. It is very a...
by 45r
Sun Jun 14, 2020 8:09 pm
Forum: Handloading
Topic: 1680 & Shooters World Blackout - Ok for 150-200 FMJ and Cast Lead?
Replies: 4
Views: 1413

Re: 1680 & Shooters World Blackout - Ok for 150-200 FMJ and Cast Lead?

I use the noe 150gc powder coated a lot and found with 1680 and CFE blk to get good velocity and accuracy was to find out what COL got me around 10 thou off the lands. Then put in enough powder to get a little compression at that COL. My 10.5 inch seekins barrel takes 21.7 CFE blk seated at 2.130 wi...
by 45r
Thu Jun 04, 2020 1:36 pm
Forum: Main Discussion Area
Topic: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?
Replies: 23
Views: 7103

Re: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?

This bullet didn't work well without sizing for me.
Probably will use the 150 grain gold dot instead and save the 123 gold dot for AK.
by 45r
Wed Jun 03, 2020 6:35 pm
Forum: Handloading
Topic: Ammo for mini300/garand build
Replies: 7
Views: 1467

Re: Ammo for mini300/garand build

For 150 grain cast powder coated loads I use 17.3 grains 300-mp sparked by cci 450's.
Getting 2035 fps with my DCA 16 inch upper and 10 shot groups can be covered by a quarter at 50 yards.
This load is accurate in several 300blks that I've tried.
by 45r
Wed May 27, 2020 9:43 pm
Forum: Main Discussion Area
Topic: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?
Replies: 23
Views: 7103

Re: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?

I like the 123 GD the most for my Ak-47.It loves them pushed hard with 1680.I had a .309 lee and polished it to .310 for using several different powder coated cast bullets in my blackouts.
I hope it will work so I can use the same bullet for both AK and AR.
by 45r
Mon May 25, 2020 11:49 am
Forum: Main Discussion Area
Topic: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?
Replies: 23
Views: 7103

Re: Anyone sized .310 123 gr gold dots down to .309 for 300 AAC?

I'm going to try them left .310 with mp-300.
I needed to turn the necks and seat them to 2.040 max col.
by 45r
Sun May 24, 2020 5:10 am
Forum: Handloading
Topic: What's your subsonic plinking bullet of choice
Replies: 16
Views: 6826

Re: What's your subsonic plinking bullet of choice

Noe 230 hollow point powder coated.
Puts the swack on varmints and most accurate cast bullet I've tried.
by 45r
Sat May 02, 2020 11:40 pm
Forum: Handloading
Topic: Brazos 215gr hitek coated lead
Replies: 15
Views: 4060

Re: Brazos 215gr hitek coated lead

I cast 240 grain powder coated bullets that looks the same from accurate molds just heavier.The most accurate load I've tried in my 9 inch barrel is 8.8 grains viht N-110 seated to 2.095. 9.4 grains imr-4227 works well also.