Search found 211 matches

by agBQ08
Sat Jul 14, 2012 9:16 pm
Forum: Classified Ads
Topic: SPF Again ***DCA 300 BLK barrel, $225 shipped***
Replies: 2
Views: 1427

SPF Again ***DCA 300 BLK barrel, $225 shipped***

16.5" Delta Company Arms with carbine gas and fewer than 400 rounds through it. Stainless with whatever black coating DCA was using. The finish is scratched on the bottom of the barrel under where the gas block goes from me dropping it during installation. However, it does not show when a gas ...
by agBQ08
Sun Jul 08, 2012 12:18 am
Forum: Classified Ads
Topic: Consolidated above, mods can delete
Replies: 1
Views: 1059

Consolidated above, mods can delete

Consolidated above, mods can delete
by agBQ08
Mon Jul 02, 2012 8:43 pm
Forum: Handloading
Topic: Picking a powder for sub/supersonic applications
Replies: 7
Views: 3252

Re: Picking a powder for sub/supersonic applications

Folks have used A1680 for both supers and subs. However, due to the different requirements there are better powders for supers and better powders for subs. H110, W296, or Lil Gun for supers. A1680 or any other powder within one or two places on a burn rate chart will work just as well. I don't worry...
by agBQ08
Mon Jul 02, 2012 8:38 pm
Forum: Handloading
Topic: Need Loads for 8" barrel
Replies: 11
Views: 2116

Re: Need Loads for 8" barrel

If I could only find a decent m80 147 gr load for a 8inch Noveske I would be a happy man. *********************** Here is what I got for m80 147 gr in my 8inch Noveske 19.0 grs of H 110 = 1932 fps average (5rds) 19.5 grs of H 110 = 1957 fps average (5rds) :shock: Whoa. My Hornady manual shows a max...
by agBQ08
Mon Jul 02, 2012 8:35 pm
Forum: New Product Announcements and Good Deals
Topic: Leupold scope
Replies: 24
Views: 8649

Re: Leupold scope

I don't like that at all. I was very disappointed along with the customer who had purchased it and several of the other guys in the shop who handled it. Copy that. Different strokes for different folks. Hope there is a scope that will suit your needs. If that individual wants to move the scope to a...
by agBQ08
Mon Jul 02, 2012 5:54 pm
Forum: Main Discussion Area
Topic: 300 Blackout ammo
Replies: 15
Views: 8801

Re: 300 Blackout ammo

I would like to purchase 3 different types of rounds. What is the best option for each of these types? 1 Supersonic-high performance round. Something similar to TAP or a Barrier Blind round Barnes 110 Grain Black Tip Vortex 2 Subsonic with excellent terminal performance Doesn't exist in a factory l...
by agBQ08
Mon Jul 02, 2012 5:51 pm
Forum: New Product Announcements and Good Deals
Topic: Leupold scope
Replies: 24
Views: 8649

Re: Leupold scope

I got to handle one of these scopes the other day and I was not impressed. When you have it on low power, you need a magnifying glass to see the reticle. That's the point. On 1x, scopes like this make the reticle really little so that is becomes like a red dot when it is turned on. Then when you go...
by agBQ08
Sun Jul 01, 2012 9:47 pm
Forum: Handloading
Topic: Need Loads for 8" barrel
Replies: 11
Views: 2116

Re: Need Loads for 8" barrel

I can not seem to get the speeds out of my 8" Noveske barrel I am loading 125gr bullet using 19.5grs of H110 powder average = 2000 fps. Is this what others are getting? The barrel is new I have put 100 rds thru it Shooting it from an M4. Thanks for any help. Sounds about right. RSilvers wrote,...
by agBQ08
Sun Jul 01, 2012 9:42 pm
Forum: Handloading
Topic: need info on powders:help,help,help?
Replies: 5
Views: 1519

Re: need info on powders:help,help,help?

What weight bullets? What are red and orange tip pulldowns? Previous reloading experience? Your loads sound a little light for even 150 grain bullets and certainly for bullets lighter than that. Pretty sure my 16 grain loads are on the light side by most standards. Since your loads are so light the ...
by agBQ08
Sun Jul 01, 2012 9:29 pm
Forum: Main Discussion Area
Topic: Who makes an affordable 9-10" Blackout barrel?
Replies: 8
Views: 2941

Re: Who makes an affordable 9-10" Blackout barrel?

Keep in mind with most barrels you have to buy a gas block and gas tube.

For the value I love Noveske barrels. They provide a Vltor block, a gas tube, and pin the gas block for 100% peace of mind.