300BlkTalk

Sorry
That code has been turned off - not for public use!

Bullet maker, maker
Al Nelson

Have some more in stock - if you are interested
http://noebulletmolds.com/NV/index.php? ... 51qqq4krv4

Bullet maker, maker
Swede Nelson

Just ordered the tooling for the 311 150Gr. SP (311414) http://i69.photobucket.com/albums/i80/swedenelson/NOE_Bullet_Moulds_311_150Gr_SP_148_gr_Sketch.jpg Should run in about a week, get your order in if you want one You can order here: http://noebulletmolds.com/smf/index.php?topic=14.0 Bullet maker...

yondering

Looking forward to your accuracy report

Bullet maker, maker
Swede Nelson

Any loads worked up yet? Ran IMR4227 and H110 through QuickLoad and get the following Added Lil'Gun 5/16 COL 2.095" 20" barrel IMR4227 16.8Gr. 1993FPS 38053PSI 101.9% L.D. 17.5Gr. 2062FPS 42613PSI 105.6% L.D. H110 17.1Gr. 2047FPS 37434PSI 88.5% L.D. 17.8Gr. 2123FBS 42622PSI 92.1% L.D. Lil'...

Rushthezeppelin Using my mold over the last three days has got it seasoned (oxidized) real well You may have to use a very light smoking with a BIC lighter at first, but keep it very light. ryoko Others have suggested using "mold release" to paint in the vent lines Never tried it but it so...

Pot temp. 700F - set and forget -
Use a fan to cool the blocks too.

Bullet maker, maker
Swede Nelson

I have received two or three reports of "fining" with this bullet. We have ran this mould now for the last 3 days and this is our findings. The vent lines in the mould are within our standards and tolerance. The design of the nose is acting like a sprue funnel and the body of the bullet is...

Its going to take a hard cast to get this to work!
50/50 (lino, wheel weighs) and maybe even water drop
The key word is "experimental"


yondering
PM sent

Bullet maker, maker
Swede Nelson

attila.

Didnt put the (.) on your handle - sorry
You should have it now

Bullet maker, maker
Swede Nelson