Search found 36 matches
- Sat Nov 15, 2014 11:58 am
- Forum: Silencer Discussion
- Topic: 5/8" x 24 vs. 1/2" x 28 for a 300 can
- Replies: 14
- Views: 15901
Re: 5/8" x 24 vs. 1/2" x 28 for a 300 can
Maybe its a factory Colt thing. Both my Lightweight Sporter Carbine and SMG 9mm upper are ½x36. Of the two other shooters I know that have them, ½x36. Again, they are Colts too. Regardless of you belief, it was the standard for 9mm for many, many years. To keep folks from putting their 5.56 flash h...
- Sat Aug 31, 2013 3:50 pm
- Forum: Bolt Actions
- Topic: light primer strikes
- Replies: 7
- Views: 2699
Re: light primer strikes
I took the bolt apart, it is a Micro 7/Model 7, and cleaned inside the bolt, the spring and such. The light strikes dropped from 18% to 5% all with 110 grain Hornady soft points. Also Trail Boss powder and Rem 7.5 benchrest primers. Of the 5% 2/3 were with reformed military brass and 1/3 was with r...
- Sun Jan 27, 2013 2:02 pm
- Forum: Other 300 Blk Guns
- Topic: Straight Blowback 300 blk?
- Replies: 21
- Views: 9599
Re: Straight Blowback 300 blk?
Your combined bolt weight and spring poundage would be formidable.You could do it but it may require a gun bearer to carry and a linebacker to cock.
- Sat Jan 26, 2013 5:29 pm
- Forum: Classified Ads
- Topic: WTB: 8-9" Blackout Upper Receiver
- Replies: 2
- Views: 690
Re: WTB: 8-9" Blackout Upper Receiver
What twist rate super or subsonic, blue or stainless.
- Sat Jan 26, 2013 11:48 am
- Forum: Classified Ads
- Topic: H&K-33 parts kit for sale
- Replies: 0
- Views: 638
H&K-33 parts kit for sale
HK33 A2 Parts Kits - Used Surplus Good Shape Parts kit does not include barrel or receiver Heckler & Koch German manufactured issued to the Malaysian Army FA bolt carrier and Fire control group. No rust 450.00 listed on other Pro sites for 545.00 This would make a great 300blk build http://image...
- Mon Dec 31, 2012 1:01 pm
- Forum: Accessories
- Topic: HeAd space
- Replies: 5
- Views: 2314
Re: HeAd space
Gauges are not that expensive.On a no go gauge you should never be able to close the bolt.Your chamber should be clean and ejector and extractor removed.
*The old Enfield P-14 P-17 you will be able to close the bolt most of the way as the locking shoulders are cam like but it should never bottom out.
*The old Enfield P-14 P-17 you will be able to close the bolt most of the way as the locking shoulders are cam like but it should never bottom out.
- Sun Dec 30, 2012 6:07 pm
- Forum: Bolt Actions
- Topic: 300blk Accuracy
- Replies: 34
- Views: 10290
Re: 300blk Accuracy
Let me get it back from my brother.He shot a 8 point with it he was amazed on how much damage a single 240gr FMJ subsonic will do.
- Sun Dec 30, 2012 5:10 pm
- Forum: Silencer Discussion
- Topic: Form 1 can build
- Replies: 27
- Views: 9503
Re: Form 1 can build
Capt. Link, You say you are a builder so I am asking questions from a builder. Your only response is I would be breaking the Law. If you are a builder and you bugger a baffle in the build phase do you have to still use the baffle or can you destroy that one and make a new one? I See why you interpr...
- Sun Dec 30, 2012 3:51 pm
- Forum: Silencer Discussion
- Topic: Form 1 can build
- Replies: 27
- Views: 9503
Re: Form 1 can build
Facts are located at the BATFE web site its your responsibility to be compliant. You must educate yourself on terms used by BATFE to get their meaning. I was simply pointing out a error to keep you out of jail.I'm not wrong I'm trying to get you right. Why not post your questions on Silencer Talk Si...
- Sun Dec 30, 2012 1:06 pm
- Forum: Silencer Discussion
- Topic: 10.5" with 9mm can seems a LOT louder than a 16"
- Replies: 9
- Views: 3035
Re: 10.5" with 9mm can seems a LOT louder than a 16"
Some suppressors work better with higher pressure gas that a shorter barrel will give and some may be overwhelmed by it.I think if you re-ran your test using a different baffle style or two your results will change.I know and have heard many times a can on a rifle is louder than the same can on a pi...